Effect of Punch Surface Grooves on Microformability of AA6063 Backward Microextrusion
Open Access
- 22 October 2021
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 12 (11) , 1299
Abstract
In order to apply conventional forming processes at the micro scale, the size effects caused by material properties and frictional effects must be taken into account. In this research, the effects of tool surface properties such as punch surface grooves on microextrudability, assessed using extrusion force, shape of the extrusion, and Vickers hardness, were investigated using an AA6063 billet. Microscale grooves of 5 to 10 µm were fabricated on the punch surface. The extrusion force increased rapidly as the stroke progressed for all the grooves. Comparing the product geometries showed that, the smaller the groove size, the lower the adhesion and the longer the backward extrusion length. The results of material analysis using EBSD showed that a 5 µm groove depth punch improved the material flowability and uniformly introduced more strain. On the other hand, material flowability was reduced and strain was applied nonuniformly when a mirror-finish tool was used. Therefore, the tribology between the tool and the material was controlled by changing the surface properties of the punch to improve formability.Keywords
This publication has 20 references indexed in Scilit:
- Micro-texture at the coated tool face for high performance cuttingInternational Journal of Machine Tools and Manufacture, 2011
- Study of size effect in micro-extrusion process of pure copperMaterials & Design (1980-2015), 2011
- Effect of specimen size and grain size on deformation in microextrusionJournal of Manufacturing Processes, 2011
- Influence of ultrasonic vibration on micro-extrusionUltrasonics, 2011
- Experimental and simulation study of deformation behavior in micro-compound extrusion processMaterials & Design (1980-2015), 2011
- Investigation of Deformation Size Effects During MicroextrusionJournal of Manufacturing Science and Engineering, 2006
- Study of the Size Effect on Friction Conditions in Microextrusion—Part I: Microextrusion Experiments and AnalysisJournal of Manufacturing Science and Engineering, 2006
- Microforming: Experimental Investigation of the Extrusion Process for Micropins and its Numerical Simulation Using RKEMJournal of Manufacturing Science and Engineering, 2004
- Process Characterization and Material Flow in Microforming at Elevated TemperaturesJournal of Manufacturing Processes, 2004
- Microforming—from basic research to its realizationJournal of Materials Processing Technology, 2002