Alignment method based on direct establishment of global world coordinate system for 3D laser vibrometry
- 29 August 2025
- journal article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (8) , 085904
Abstract
Three-dimensional (3D) full-field scanning laser Doppler vibrometry represents one of the most significant non-contact vibration measurement technologies currently available. Among its core components, 3D alignment and laser vibrometry constitute the two most critical technical elements. 3D alignment obtains the rotation matrices from the local probe coordinate system (PCS) to the global world coordinate system (WCS), thereby mapping non-orthogonal vibration components measured along three laser beam directions by three probes into the orthogonal WCS. However, existing alignment methods demonstrate significant dependence on calibration plates or additional measurement equipment, while exhibiting limited adaptability to complex curved structures, thus constraining their engineering applications. To address this issue, this paper proposes a 3D alignment algorithm based on the developed mathematical model of 2D rotating mirror outgoing light rays that directly establishes the global WCS on the measured object surface. This method utilizes the geometric constraint relationships between multiple laser beam’s direction vectors and the WCS when multiple probes illuminate the same point, thereby solving for the transformation matrix from the PCS to the WCS. This approach eliminates the dependence on calibration plates or feature points that is characteristic of conventional methods. Experimental results demonstrate that the method achieves maximum average relative errors of 2.85% and 6.53% in planar and curved surface alignment scenarios, respectively, while simultaneously enabling 3D full-field laser scanning. Compared to existing technologies, the proposed method exhibits significant advantages in terms of scenario adaptability and engineering practicality.Keywords
Funding Information
- National Natural Science Foundation of China (62473279)
- Guangxi Key Laboratory of Automatic Detecting Technology (YQ24203)
- Natural Science Foundation of Tianjin (24JCZDJC01070)
This publication has 22 references indexed in Scilit:
- Operational modal analysis of outdoor slanted rotational blades under natural excitation using a long-range tracking continuously scanning laser Doppler vibrometerOptics & Laser Technology, 2024
- Identifying structural properties of a steel railway bridge for structural health monitoring using laser Doppler vibrometryAutomation in Construction, 2024
- Identification of modal parameters of a model turbine blade with a curved surface under random excitation with a three-dimensional continuously scanning laser Doppler vibrometer systemMeasurement, 2023
- The robotized laser doppler vibrometer: On the use of an industrial robot arm to perform 3D full-field velocity measurementsOptics and Lasers in Engineering, 2021
- Three-dimensional full-field vibration measurements using a handheld single-point laser Doppler vibrometerMechanical Systems and Signal Processing, 2019
- 3D model assisted fully automated scanning laser Doppler vibrometer measurementsOptics and Lasers in Engineering, 2017
- Investigation of three-dimensional vibration measurement by a single scanning laser Doppler vibrometerJournal of Sound and Vibration, 2017
- AUTOMATED MODAL ANALYSIS BY SCANNING LASER VIBROMETRY: PROBLEMS AND UNCERTAINTIES ASSOCIATED WITH THE SCANNING SYSTEM CALIBRATIONMechanical Systems and Signal Processing, 2001
- Geometrical method for the determination of the position and orientation of a scanning laser doppler vibrometerOptics and Lasers in Engineering, 1996
- An identification algorithm for directing the measurement point of scanning laser vibrometersOptics and Lasers in Engineering, 1995