Windage loss model and flow characteristics for curved shroud gaps in a closed sCO2 radial inflow turbine
Authors:
- Zhuobin ZhaoZZZhuobin Zhao
- Qinghua DengQDQinghua Deng
- Haocheng WangHWHaocheng Wang
- Jun LiJLJun Li
- 1 September 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Abstract
A theoretical model for windage loss in curved shroud gaps under laminar flow conditions is developed by utilizing the concept of the arc differential method. An empirical model applicable to turbulent flow is established by incorporating rotational Reynolds number, throughflow Reynolds number, gap shapes, and wall thermal boundary conditions. The influence of these parameters on both flow characteristics and windage loss is systematically analyzed in this paper. The findings reveal that the skin friction coefficient decreases with higher rotational Reynolds numbers but increases with elevated throughflow Reynolds numbers, with a distinct transition from plunge zone to a plateau zone observed at a rotational Reynolds number of 6.8 × 106. While increased throughflow Reynolds numbers enhance wall shear stress, thereby improving momentum transfer efficiency within the boundary layer. The dominance of the strain tensor over the rotation tensor within the wall boundary layer directly translates to frictional resistance. And flow separation vortices are identified near the inlet. Larger radius ratios amplify windage loss, particularly in midstream and downstream regions characterized by high shear stress and turbulent kinetic energy. Elevated rotor wall temperatures reduce the skin friction coefficient due to altered local fluid temperature distributions compared to adiabatic conditions. The proposed models address the current research gap in predicting windage loss for curved gaps and provide critical insights for optimizing sCO2 radial inflow turbine designs.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFB4102203)
- National Natural Science Foundation of China (U20A20303)
This publication has 32 references indexed in Scilit:
- Optimal design and tip leakage flow characteristics analysis of radial inflow turbine used in organic Rankine and vapor compression refrigeration systemEnergy, 2024
- Dimensionless analysis of flow and heat transfer characteristics in a high-speed rotor–stator disk cavity based on similarity criteriaApplied Thermal Engineering, 2023
- The impact of mainstream ingress on the leakage flow and loss in partial shrouded turbinesAerospace Science and Technology, 2023
- Numerical investigation on the effects of HC geometry on the flow and heat transfer in the disk cavity system at the turbine vane rootApplied Thermal Engineering, 2023
- Air curtain application for leakage reduction in gas turbine shroud sealingAerospace Science and Technology, 2021
- Review of supercritical CO2 technologies and systems for power generationApplied Thermal Engineering, 2021
- Turbomachinery2017
- Shroud leakage flow models and a multi-dimensional coupling CFD (computational fluid dynamics) method for shrouded turbinesEnergy, 2016
- Using R2 to compare least-squares fit models: When it must failChemometrics and Intelligent Laboratory Systems, 2011
- Turbulente Strömungen zwischen zwei rotierenden konaxialen ZylindernArchive of Applied Mechanics, 1933