QDQinghua Deng

Qinghua Deng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Qinghua Deng has a total of 52 co-authors. Here are the top co-authors by number of shared publications:

  • Zhenping Feng

    School of Energy and Power Engineering, Xi'an Jiaotong University , Xi'an 710049, China

    21 shared publications
  • Jun Li

    Institute of Turbomachinery, School of Energy & Power Engineering, Xi'an Jiaotong University , Xi'an 710049, China

    6 shared publications
  • Juan He

    Shaanxi Engineering Laboratory of Turbomachinery and Power Equipment, Institute of Turbomachinery, Xi’an Jiaotong University, P.R. China

    5 shared publications
  • Huihui Wang

    Xi’an Jiaotong University Shaanxi Engineering Laboratory of Turbomachinery and Power Equipment, Institute of Turbomachinery Xi’an 710049 , China

    4 shared publications
  • Jun Li

    Xi An Jiao Tong Univ, Inst Turbomachinery, Shaanxi Engn Lab Turbomachinery & Power Equipment, Xian 710049, Shaanxi, Peoples R China

    4 shared publications
  • Zhenping Feng

    Xi An Jiao Tong Univ, Inst Turbomachinery, Shaanxi Engn Lab Turbomachinery & Power Equipment, Xian 710049, Shaanxi, Peoples R China

    4 shared publications

Latest Publications

  • Open Access

    Quantitative Criterion and Breakthrough Transition of Acoustic Fire Extinguishment: From Generalized Model Establishment to Experimental Revelation of Nonlinear Frequency Boundaries

    by Mengze Guo, Jieming Zhang, Yuning Guo, Jiani Pan, Shumin Zhao, Qinghua Deng, Aiping Fang, Wen Cao

    To investigate the critical extinction criterion for fire extinguishment through acoustic oscillation and achieve the transition from empirical qualitative studies to quantitative precision applications in acoustic fire extinguishment, this study conducts systematic extension research on the threefold limitations of the flame–fuel cycle model by Friedman, A. N.—namely, its restriction to liquid fuels, neglect of Prandtl number variations, and undefined frequency applicability boundaries. By modifying the Quintiere–Spalding B-number model for gaseous fuels and premixed combustion, and introducing flame geometric characteristic terms and combustion type correction terms, a generalized acoustic extinction criterion model applicable to gaseous fuels is established, breaking through the severe limitation that the original theory was only applicable to liquid fuels with similar Prandtl numbers. Through logarithmic fitting of methane, propane, and butane diffusion flames, the flame height term exponent is quantitatively determined as α = 0.6868; for methane and propane gas premixed flames at an equivalence ratio ϕ ≈ 1, the flame type terms are determined as kM = 3.7975 and kP = 2.8123, respectively, and the Prandtl number exponent term as δ = 4.4356, ultimately yielding the critical extinction criterion for gaseous fuel flames as Θ′A = 0.0817. The study further reveals the phenomena of flame necking and fracture under acoustic field interference, providing independent morphological corroboration for the physical validity of this extinction criterion. Of particular importance, this research discovers, for the first time through broadband experiments, the anomalous increase in the critical particle velocity for acoustic fire extinguishment in the relatively high-frequency band above 90 Hz, experimentally defining the upper frequency limit for the applicability of the linearized equivalent dominant model of acoustic fire extinguishment and revealing the mechanism transition caused by nonlinear acoustic streaming contributions above this frequency. This study provides theoretical support for the engineering application of acoustic fire extinguishment technology, equipment frequency selection, and in-depth exploration of the mechanism of sound-induced flame extinction.

  • Windage loss model and flow characteristics for curved shroud gaps in a closed sCO2 radial inflow turbine

    by Zhuobin Zhao, Qinghua Deng, Haocheng Wang, Jun Li

    A theoretical model for windage loss in curved shroud gaps under laminar flow conditions is developed by utilizing the concept of the arc differential method. An empirical model applicable to turbulent flow is established by incorporating rotational Reynolds number, throughflow Reynolds number, gap shapes, and wall thermal boundary conditions. The influence of these parameters on both flow characteristics and windage loss is systematically analyzed in this paper. The findings reveal that the skin friction coefficient decreases with higher rotational Reynolds numbers but increases with elevated throughflow Reynolds numbers, with a distinct transition from plunge zone to a plateau zone observed at a rotational Reynolds number of 6.8 × 106. While increased throughflow Reynolds numbers enhance wall shear stress, thereby improving momentum transfer efficiency within the boundary layer. The dominance of the strain tensor over the rotation tensor within the wall boundary layer directly translates to frictional resistance. And flow separation vortices are identified near the inlet. Larger radius ratios amplify windage loss, particularly in midstream and downstream regions characterized by high shear stress and turbulent kinetic energy. Elevated rotor wall temperatures reduce the skin friction coefficient due to altered local fluid temperature distributions compared to adiabatic conditions. The proposed models address the current research gap in predicting windage loss for curved gaps and provide critical insights for optimizing sCO2 radial inflow turbine designs.

  • Open Access

    Windage and Leakage Losses in Impeller Back Gap and Labyrinth Seal Cavities of Supercritical CO2 Centrifugal Compressors

    by Bing Tang, Jianxin Liao, Zhuobin Zhao, Qinghua Deng, Jun Li, Zhenping Feng

    The windage loss in impeller back gap and labyrinth seal cavities significantly impacts the aerodynamic performances of supercritical carbon dioxide (sCO2) compressors. To accurately calculate windage loss, essential factors affecting the skin friction coefficients Cf,d (disk-type gap) and Cf,s (shaft-type gap), including Reynolds number Re, pressure ratio π, and radius ratio η, are investigated in this paper. The flow characteristics of the gap are analyzed and prediction models are proposed. The results indicate that both Cf,d and Cf,s decrease with increasing Re and grow with π and η, attributable to expanded high-vorticity regions caused by enhanced flow instability and larger vortices. The leakage flow rate m is unchanged for Re < 106 since the fluid can flow into the impeller back gap, and slightly decreases for Re ≥ 106 due to the centrifugal force and the inhibition effect of the vortices filling inlet regions. Moreover, the m grows with π and η due to a larger pressure difference and through-flow area. Maximal relative deviations of 6.23% and 6.83% can satisfy the requirements for calculating accurate windage loss in the impeller back gap and labyrinth seal cavities, which help the primary design of sCO2 compressors.


  • Action Mechanism of Film Extraction on Channel Impingement Cooling for Blade Leading Edge Using Large Eddy Simulation

    by Huihui Wang, Xiying Niu, Qinghua Deng, Zhenping Feng

    Various internal cooling techniques combined with external film cooling are applied to cool gas turbine blades, and the coolant extraction can cause variations in internal flow structures and cooling effectiveness. Effects of film extraction under different film hole diameters and coolant mass flow ratio on heat transfer and flow characteristics of channel impingement cooling are presented using large eddy simulation (LES) in this article. The current work was undertaken based on turbine blade dimensions and turbine operating conditions. The results indicate that film extraction coupled with the curvature-induced instability dominates flow patterns and heat transfer in the channel impingement cooling structure with a film hole, especially in the bend region corresponding to the leading edge of turbine blades. Film coolant extraction can disrupt the streamwise counterrotating flow circulation pair. The latter is caused by the curvature-induced instability and is also the major driver of multilongitudinal vortices. The hole edge vortex generated by coolant bleed amplifies heat transfer at the leading edge, and the effect is more significant as the film hole diameter increases. Conversely, heat transfer coefficient downstream of the cooling channel decreases due to a reduction in cooling air. The increasing film bleed flow increases overall total pressure loss, while flow loss in the cooling channel decreases because of the weakened flow circulations and reduced coolant mass flow. This work provides an in-depth insight into the cooling performance of channel impingement cooling with film extraction, contributing to designing film cooling for turbine blades with multichannel wall jet cooling.


  • Heat Transfer and Flow Characteristics of Channel Impingement Cooling Structure at Leading Edge Inside Turbine Blades Using Large Eddy Simulation

    by Huihui Wang, Qinghua Deng, Zhenping Feng

    As a main part of multichannel wall jet cooling structure, channel impingement cooling is a cooling strategy of great concern at the leading edge inside of the turbine blade. In this paper, heat transfer and flow behavior in the channel impingement cooling structure are investigated by large eddy simulation (LES). The results imply that impingement created by curvature-induced centrifugal instabilities in the turning region of the cooling channel is dominated by a streamwise vortex system containing a counter-rotating Dean vortex, which presents high heat transfer streaks along the streamwise direction on the target wall. The intensely unsteady nature of the cooling jet induced by a lack of equilibrium between the pressure gradient and the centrifugal force is precisely captured herein by LES. An attaching-wall jet formed on the outer wall downstream of the cooling channel has highly three-dimensional characteristics not observed by Reynolds-averaged Navier–Stokes equations (RANS). Heat transfer augmentation on the target wall of the cooling channel is mainly due to the intensifying streamwise vortex system developing in the turning region as driven by the centrifugal force. This research work will provide a reference for the optimization and application of multichannel wall jet cooling for gas turbine blades.


  • Open Access

    Action mechanism of axial flow on windage loss in open shaft‐type gap with CO2

    by Lehao Hu, Qinghua Deng, Zhouyang Liu, Jun Li, Zhenping Feng

    The windage loss in rotor‐stator gap has an important effect on rotating machinery, especially with higher rotational speed and fluid density. However, the mechanism of axial flow on windage loss in open shaft‐type gap is hardly studied in most literature. To clarify it, the influences of axial Reynolds number Reu and rotational Reynolds number Reω on skin friction coefficient Cf are investigated, and flow characteristics are analyzed with different gap geometry, radius ratio η. First, the results reveal that the Cf remains constant when Reu is less than 2.8 × 104 and increases rapidly as Reu when Reu ≥ 2.8 × 104, which indicates that the effect of axial velocity u on Cf is negligible for low Reu. The positive relative deviation Δ suggests that the axial flow makes windage loss and Cf rise. Besides, a larger number of Taylor vortexes fill with gap when the effect of the centrifugal force is larger than that of the inertial force, but they gradually disappear as Reu. Subsequently, the Cf and Δ increase as η, highlighting that the effect of u on windage loss and Cf is more prominent for larger η. The fact that vorticity near walls is larger than that at the center of gap reveals that windage loss arises from the interaction between walls and fluid rather than the dissipation with fluid itself. Finally, the model of Cf in shaft‐type gap is proposed in different Reω ranges based on numerical results, and the maximum sum of squares error of 1.02 × 10−5 and minimal R2 of 0.969 satisfy the requirement of fitting accuracy and indicate that the fitting model can accurately predict Cf. The conclusions significantly help predict windage loss in open shaft‐type gap with axial flow, and further improve the design for generators of supercritical CO2 turbine‐alternator‐compressor unit.


  • Open Access

    Skin-Friction Coefficient Model Verification and Flow Characteristics Analysis in Disk-Type Gap for Radial Turbomachinery

    by Zhuobin Zhao, Qinghua Deng, Lehao Hu, Jun Li, Zhenping Feng

    Under the conditions of high speed and density flow, the windage loss in the gap behind an impeller has an important influence on its thermal power conversion efficiency. Daily and Nece took the relative gap and Reynolds number as the characteristic parameters and divided the flow of a rotating disk in a closed chamber into four flow regions through laminar flow, turbulent flow and state of boundary layers. In this paper, the skin-friction coefficient model of Regio III and IV was verified by a numerical method under conditions corresponding to the typical Reynolds number range for a radial impeller. The results show that when the relative gap increases, the relative deviation between the numerical calculation and the model prediction results decreases, and the maximum deviation is −12.4%. With the increase of Reynolds number, the Region IV model is more accurate. Region III has the flow state of boundary layers merging and separation at the same time. Both models have good prediction accuracy with different mediums of air, water-liquid and critical CO2. The deviation in Region III is larger and shows a decreasing trend with respect to Region IV, Based on the two models, a method for predicting the optimal gap is proposed. The method is verified to be reliable and can minimize windage loss.


  • Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge

    by Huihui Wang, Qinghua Deng, Wei He, Zhenping Feng

    Efficient cooling is imperative for gas turbine blades that suffer from hot gas erosion. Cooling and flow characteristics of multi-channel wall jet structure combined with film holes for blade leading edge are numerically investigated through the Reynolds-averaged Navier–Stokes method in this paper. Several geometrical schemes with different rows and diameters of film holes were conducted, and the influences of the cooling air mass flow ratio of the first coolant supply cavity were also considered, which presented the detailed flow and cooling characteristics of wall jet and film composite cooling on conjugate heat transfer. The results implied that film extraction improves the overall cooling effectiveness compared with pure wall jet cooling. And the mainstream intrusion happens in some film holes at the bottom of blades, especially on the pressure side. The film-hole diameter can raise the mass flow ratio and enhance external thermal protection produced by cooling air, and it also affects the uniformity of film flow and the temperature gradient of some regions for turbine blades. Furthermore, the cooling performance and pressure loss are significantly influenced by the coolant mass flowrate of the first cooling air supply cavity. This study will offer a consultation for the design of film-hole structures for multi-channel wall jet cooling.


  • Impingement heat transfer enhancement in crossflow by a skewed twisted rib pair for simplified leading edge structure

    by Juan He, Qinghua Deng, Kun Xiao, Zhenping Feng

    Impingement cooling is a widely used cooling technology with extremely high local heat flux dissipation, but its heat transfer is often destroyed by upstream crossflow. To improve the impingement heat transfer under crossflow condition, a skewed-twisted rib pair is proposed for simplified leading edge structure. The flow and heat transfer characteristics of Baseline and STRP cases are compared when the crossflow ratio varies from 0.2 to 0.4. According to the results, in both Baseline and STRP cases, increased crossflow ratio results in a decrease in impingement heat transfer, and it also leads to the peak value location of Nusselt number shift further downstream. Besides, with the increase of crossflow ratio, the total pressure-drop of jet decreases, but that of crossflow increases. Under the same crossflow ratio, the arrangement of STRP intensifies the turbulence level and induces an additional vortex pair whose centerline direction is same as jet, so the impingement heat transfer performance is improved effectively. Moreover, the effect of skewed-twisted rib pair height is considered, and it is found that the increased height makes the heat transfer enhancement effect get obvious, but it also leads to an increase in total pressure-drops of both jet and crossflow.