Semi-active vibration control of structural systems based on a reference active control law: output emulation approach
- 31 July 2015
- journal article
- research article
- Published by Hindawi Limited in Structural Control and Health Monitoring
- Vol. 23 (3) , 423-445
Abstract
A new semi-active control strategy that approximates a predicted control output of a reference active control is proposed. A variable parameter of a semi-active control device is selected at every time instant so that the predicted control output of the semi-active control system becomes close to the corresponding predicted control output of the reference active control as much as possible. Parameters of the reference active control law are optimized in the premise of the aforementioned ‘output emulation’ strategy so that the control performance of the semi-active control becomes good and the ‘error’ in the sense of achieved control performance between the reference active control and semi-active control systems becomes small. A pole placement method based on a linear matrix inequality (LMI) framework is adopted as the reference active control law. Parameters to determine the domain in the complex plane where the closed-loop poles are placed are searched so that control performance of the semi-active control system based on the output emulation approach is optimized. Copyright © 2015 John Wiley & Sons, Ltd.Keywords
This publication has 24 references indexed in Scilit:
- Analysis of capability for semi-active or passive damping systems to achieve the performance of active control systemsStructural Control and Health Monitoring, 2010
- Inverse Lyapunov Approach for semi-active control of civil structuresStructural Control and Health Monitoring, 2010
- Bang-bang Type Semi-active Control of Civil Structures: A Prediction-based ApproachJournal of System Design and Dynamics, 2010
- Semi-active neuro-control for base-isolation system using magnetorheological (MR) dampersEarthquake Engineering & Structural Dynamics, 2006
- Semi-active control of vehicle suspension with magneto-rheological dampersJournal of Sound and Vibration, 2005
- Parameter-dependent state observer design for affine LPV systemsInternational Journal of Control, 2001
- Control of seismically excited vibration using electrorheological materials and Lyapunov methodsIEEE Transactions on Control Systems Technology, 2001
- An experimental study of MR dampers for seismic protectionSmart Materials and Structures, 1998
- Controlling buildings: a new frontier in feedbackIEEE Control Systems, 1997
- H/sub ∞/ design with pole placement constraints: an LMI approachIEEE Transactions on Automatic Control, 1996