Towards 50% Efficiency in Opposed Free-Piston Linear Generators Operating with Natural Gas and HCCI Combustion
Open Access
Abstract
Internal combustion engines are a well-established, efficient and dispatchable solution for distributed power generation and they are widely used in various sectors including grid balancing, data centers and combined heat and power systems. Current research efforts focus on further increasing efficiency, enabling decarbonization through renewable fuels and improving responsiveness to electricity demand in the presence of variable renewable energy sources. In this context, the free-piston linear generator (FPLG) stands out as a highly promising technology, as it directly converts piston motion into electricity, offering high efficiency, reduced mechanical complexity and seamless grid integration. Initially explored for its high-efficiency potential with homogeneous charge compression ignition combustion at extreme compression ratios, opposed-piston FPLGs are now commercially available for distributed power generation, delivering global efficiencies exceeding 45%, near-zero emissions and multi-fuel capability. Building on the detailed studies conducted by Svrcek and co-authors, this work investigates the power-generation potential of low-temperature homogeneous combustion using CFD simulations with detailed chemical kinetics. First, rapid compression machine (RCM) experiments with methane were reproduced in simulations to validate the proposed methodology and to consolidate experimental findings on the maximum achievable efficiency. Subsequently, an extensive RCM simulation campaign supported the identification of optimal operating conditions in terms of air–fuel ratio using methane as fuel. The RCM results enabled the definition of a preliminary methane-fueled opposed-piston FPLG configuration. Full-cycle simulations including gas exchange, mixing and combustion demonstrated an indicated efficiency of 58% at an equivalence ratio and a compression ratio of 50. The key novelties of this study are the development of a novel RCM-2 configuration that more closely reproduces the dynamic behavior of an opposed-piston FPLG including air-spring effects and the introduction of a divided intake port strategy to simultaneously reduce fuel slip and mitigate knocking behaviour through charge stratification. The simulation results for the proposed configuration confirm the potential of opposed-piston FPLGs for high-efficiency power generation and highlight key parameters affecting performance and emissions formation.
Keywords
Funding Information
- European Union—NextGenerationEU—Project Title (B53D23005670006)
This publication has 43 references indexed in Scilit:
- Motoring control of a free piston engine and linear electric machineApplied Energy, 2026
- Development of a coupling model and parametric analysis of an opposed free-piston engine linear generatorApplied Thermal Engineering, 2022
- Non-linear and multi-domain modelling of a permanent magnet linear synchronous machine for free piston engine generatorsEnergy Conversion and Management: X, 2022
- Comprehensive kinetic study of combustion technologies for low environmental impact: MILD and OXY-fuel combustion of methaneCombustion and Flame, 2020
- Modeling advanced combustion modes in compression ignition engines with tabulated kineticsApplied Energy, 2019
- Combustion System Development of an Opposed Piston 2-Stroke Diesel EngineEnergy Procedia, 2017
- Experimental and numerical analysis of nitric oxide effect on the ignition of iso-octane in a single cylinder HCCI engineCombustion and Flame, 2013
- An experimental and detailed chemical kinetic modeling study of hydrogen and syngas mixture oxidation at elevated pressuresCombustion and Flame, 2013
- Predictive piston motion control in a free-piston internal combustion engineApplied Energy, 2010
- Parametric study of a free piston linear alternatorInternational Journal of Automotive Technology, 2010