Tommaso Lucchini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Tommaso Lucchini has a total of 205 co-authors. Here are the top co-authors by number of shared publications:
- Gianluca D’ Errico
Politecnico di Milano, Italy
52 shared publications Angelo Onorati
Politecnico di Milano, Milano, Italy
13 shared publications- Angelo Onorati
ICE Group—Energy Department, Politecnico di Milano, 20156 Milan, Italy
7 shared publications - Francesco Contino
Institute of Mechanics, Materials and Civil Engineering (iMMC), Université catholique de Louvain (UCLouvain), Place du Levant, 2, 1348 Louvain-la-Neuve, Belgium
7 shared publications - Eliseo Ranzi
CRECK Modeling Lab, Department of Chemistry Materials and Chemical Engineering, Politecnico di Milano, 20133 Milano, Italy
6 shared publications - Hoon Kiat Ng
University of Nottingham Malaysia
6 shared publications
Latest Publications
- Open Access
- 26 June 2026
- Published by Elsevier in SSRN Electronic Journal
Theoretical analysis of the optimal piston motion trajectory for efficiency enhancement of free-piston engine generator
The free-piston engine generator (FPEG) is a promising hybrid power system offering high efficiency and multi-fuel adaptability. Unlike traditional engines, the FPEG eliminates the crankshaft, enabling a variable piston motion trajectory that can be leveraged for efficiency improvement. This paper investigates the optimal piston motion trajectory for the FPEG. The trajectory is divided into three stages according to the in-cylinder thermodynamic process, and the optimization problem is formulated to maximize brake thermal efficiency. A three-layer hierarchical optimization strategy is developed: the outer layer optimizes time allocation among stages; the middle layer ensures thermodynamic consistency between the two cylinders; and the inner layer solves the optimal control problem for each stage. Simulation results show that the optimized trajectory features a constant-displacement region that increases peak in-cylinder pressure and enhances heat-to-work conversion, followed by a rapid motion region that suppresses heat transfer loss. Compared with the TCE and FPEG, brake thermal efficiency is improved by 3.17% and 2.35%, respectively. The method achieves efficiency gains under various combustion durations, with the greatest enhancement of 6.86% under shorter combustion durations. The optimization mechanism shifts from reducing heat transfer loss to reducing exhaust loss as combustion duration increases. These results demonstrate that the proposed trajectory optimization is an effective and robust approach for improving FPEG thermal efficiency, especially for rapid combustion engines. This study provides theoretical guidance for optimal trajectory design of the FPEG and offers potential applications for other reciprocating engines.
- 26 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTheoretical analysis of the optimal piston motion trajectory for efficiency enhancement of free-piston engine generator
The free-piston engine generator (FPEG) is a promising hybrid power system offering high efficiency and multi-fuel adaptability. Unlike traditional engines, the FPEG eliminates the crankshaft, enabling a variable piston motion trajectory that can be leveraged for efficiency improvement. This paper investigates the optimal piston motion trajectory for the FPEG. The trajectory is divided into three stages according to the in-cylinder thermodynamic process, and the optimization problem is formulated to maximize brake thermal efficiency. A three-layer hierarchical optimization strategy is developed: the outer layer optimizes time allocation among stages; the middle layer ensures thermodynamic consistency between the two cylinders; and the inner layer solves the optimal control problem for each stage. Simulation results show that the optimized trajectory features a constant-displacement region that increases peak in-cylinder pressure and enhances heat-to-work conversion, followed by a rapid motion region that suppresses heat transfer loss. Compared with the TCE and FPEG, brake thermal efficiency is improved by 3.17% and 2.35%, respectively. The method achieves efficiency gains under various combustion durations, with the greatest enhancement of 6.86% under shorter combustion durations. The optimization mechanism shifts from reducing heat transfer loss to reducing exhaust loss as combustion duration increases. These results demonstrate that the proposed trajectory optimization is an effective and robust approach for improving FPEG thermal efficiency, especially for rapid combustion engines. This study provides theoretical guidance for optimal trajectory design of the FPEG and offers potential applications for other reciprocating engines.
- Open Access
- 17 June 2026
- Published by Elsevier in SSRN Electronic Journal
Theoretical analysis of the optimal piston motion trajectory for efficiency enhancement of free-piston engine generator
The free-piston engine generator (FPEG) is considered a promising hybrid power system due to its simple and compact structure, high efficiency, and multi-fuel adaptability. Different from the traditional engine (TCE), the elimination of the crankshaft mechanism enables a variable piston motion trajectory in the FPEG, which offers the potential for efficiency enhancement. Leveraging this unique feature, this paper investigates the optimal piston motion trajectory for a dual-cylinder FPEG. The trajectory is divided into three stages according to the evolution of the in-cylinder thermodynamic process, and the optimization problem is formulated with the objective of maximizing brake thermal efficiency. Then, based on optimal control strategy, a three-layer hierarchical optimization strategy is developed: the outer layer optimizes time allocation among stages; the middle layer ensures thermodynamic consistency between the two cylinders, and the inner layer solves the optimal control problem for each individual stage. Simulation results show that the optimized trajectory is characterized by a constant-displacement region that leads to a higher peak in-cylinder pressure and enhanced heat-to-work conversion capability, followed by a rapid motion region that avoids an increase in heat transfer loss. Consequently, compared with the TCE and FPEG, the brake thermal efficiency is eventually enhanced by 3.17% and 2.35%, respectively. Furthermore, the influence of combustion duration on optimization effectiveness is investigated. The proposed method achieves efficiency improvements under various combustion durations, with the greatest efficiency enhancement of 6.86% occurring under shorter combustion durations. From the energy balance viewpoint, the optimization mechanism shifts from reducing heat transfer loss to reducing exhaust loss as combustion duration increases. These results demonstrate that the proposed trajectory optimization is an effective and robust pathway for improving FPEG thermal efficiency, especially for engines that achieve rapid combustion. This study provides theoretical guidance and valuable insights for optimal trajectory design of the FPEG. The proposed optimization method has potential applications in trajectory optimization for other reciprocating engines.
- 17 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTheoretical analysis of the optimal piston motion trajectory for efficiency enhancement of free-piston engine generator
The free-piston engine generator (FPEG) is considered a promising hybrid power system due to its simple and compact structure, high efficiency, and multi-fuel adaptability. Different from the traditional engine (TCE), the elimination of the crankshaft mechanism enables a variable piston motion trajectory in the FPEG, which offers the potential for efficiency enhancement. Leveraging this unique feature, this paper investigates the optimal piston motion trajectory for a dual-cylinder FPEG. The trajectory is divided into three stages according to the evolution of the in-cylinder thermodynamic process, and the optimization problem is formulated with the objective of maximizing brake thermal efficiency. Then, based on optimal control strategy, a three-layer hierarchical optimization strategy is developed: the outer layer optimizes time allocation among stages; the middle layer ensures thermodynamic consistency between the two cylinders, and the inner layer solves the optimal control problem for each individual stage. Simulation results show that the optimized trajectory is characterized by a constant-displacement region that leads to a higher peak in-cylinder pressure and enhanced heat-to-work conversion capability, followed by a rapid motion region that avoids an increase in heat transfer loss. Consequently, compared with the TCE and FPEG, the brake thermal efficiency is eventually enhanced by 3.17% and 2.35%, respectively. Furthermore, the influence of combustion duration on optimization effectiveness is investigated. The proposed method achieves efficiency improvements under various combustion durations, with the greatest efficiency enhancement of 6.86% occurring under shorter combustion durations. From the energy balance viewpoint, the optimization mechanism shifts from reducing heat transfer loss to reducing exhaust loss as combustion duration increases. These results demonstrate that the proposed trajectory optimization is an effective and robust pathway for improving FPEG thermal efficiency, especially for engines that achieve rapid combustion. This study provides theoretical guidance and valuable insights for optimal trajectory design of the FPEG. The proposed optimization method has potential applications in trajectory optimization for other reciprocating engines.
- Open Access
Towards 50% Efficiency in Opposed Free-Piston Linear Generators Operating with Natural Gas and HCCI Combustion
Internal combustion engines are a well-established, efficient and dispatchable solution for distributed power generation and they are widely used in various sectors including grid balancing, data centers and combined heat and power systems. Current research efforts focus on further increasing efficiency, enabling decarbonization through renewable fuels and improving responsiveness to electricity demand in the presence of variable renewable energy sources. In this context, the free-piston linear generator (FPLG) stands out as a highly promising technology, as it directly converts piston motion into electricity, offering high efficiency, reduced mechanical complexity and seamless grid integration. Initially explored for its high-efficiency potential with homogeneous charge compression ignition combustion at extreme compression ratios, opposed-piston FPLGs are now commercially available for distributed power generation, delivering global efficiencies exceeding 45%, near-zero emissions and multi-fuel capability. Building on the detailed studies conducted by Svrcek and co-authors, this work investigates the power-generation potential of low-temperature homogeneous combustion using CFD simulations with detailed chemical kinetics. First, rapid compression machine (RCM) experiments with methane were reproduced in simulations to validate the proposed methodology and to consolidate experimental findings on the maximum achievable efficiency. Subsequently, an extensive RCM simulation campaign supported the identification of optimal operating conditions in terms of air–fuel ratio using methane as fuel. The RCM results enabled the definition of a preliminary methane-fueled opposed-piston FPLG configuration. Full-cycle simulations including gas exchange, mixing and combustion demonstrated an indicated efficiency of 58% at an equivalence ratio and a compression ratio of 50. The key novelties of this study are the development of a novel RCM-2 configuration that more closely reproduces the dynamic behavior of an opposed-piston FPLG including air-spring effects and the introduction of a divided intake port strategy to simultaneously reduce fuel slip and mitigate knocking behaviour through charge stratification. The simulation results for the proposed configuration confirm the potential of opposed-piston FPLGs for high-efficiency power generation and highlight key parameters affecting performance and emissions formation.Open AccessTowards 50% Efficiency in Opposed Free-Piston Linear Generators Operating with Natural Gas and HCCI Combustion
Internal combustion engines are a well-established, efficient and dispatchable solution for distributed power generation and they are widely used in various sectors including grid balancing, data centers and combined heat and power systems. Current research efforts focus on further increasing efficiency, enabling decarbonization through renewable fuels and improving responsiveness to electricity demand in the presence of variable renewable energy sources. In this context, the free-piston linear generator (FPLG) stands out as a highly promising technology, as it directly converts piston motion into electricity, offering high efficiency, reduced mechanical complexity and seamless grid integration. Initially explored for its high-efficiency potential with homogeneous charge compression ignition combustion at extreme compression ratios, opposed-piston FPLGs are now commercially available for distributed power generation, delivering global efficiencies exceeding 45%, near-zero emissions and multi-fuel capability. Building on the detailed studies conducted by Svrcek and co-authors, this work investigates the power-generation potential of low-temperature homogeneous combustion using CFD simulations with detailed chemical kinetics. First, rapid compression machine (RCM) experiments with methane were reproduced in simulations to validate the proposed methodology and to consolidate experimental findings on the maximum achievable efficiency. Subsequently, an extensive RCM simulation campaign supported the identification of optimal operating conditions in terms of air–fuel ratio using methane as fuel. The RCM results enabled the definition of a preliminary methane-fueled opposed-piston FPLG configuration. Full-cycle simulations including gas exchange, mixing and combustion demonstrated an indicated efficiency of 58% at an equivalence ratio and a compression ratio of 50. The key novelties of this study are the development of a novel RCM-2 configuration that more closely reproduces the dynamic behavior of an opposed-piston FPLG including air-spring effects and the introduction of a divided intake port strategy to simultaneously reduce fuel slip and mitigate knocking behaviour through charge stratification. The simulation results for the proposed configuration confirm the potential of opposed-piston FPLGs for high-efficiency power generation and highlight key parameters affecting performance and emissions formation. - Open Access
Numerical Investigation of Spray Impingement Heat Transfer in the Film Boiling Regime
Spray impingement cooling is a well-established heat removal technique employed across a wide range of industrial processes. A particularly significant cooling regime arises when the temperature of the cooled surface surpasses the Leidenfrost temperature of the spray. Developing an accurate numerical framework for this regime holds considerable potential for optimising industrial applications such as cryogenic machining and spray quenching. This paper presents a Eulerian–Lagrangian Conjugate Heat Transfer (CHT) model tailored for spray impingement under Leidenfrost conditions. Two heat transfer sub-models are incorporated to characterise droplet–solid thermal interaction: the first, developed by Breitenbach, is grounded in a theoretical analysis of the droplet impingement process, while the second, proposed by Deb, relies on a semi-empirical correlation. Both models were validated against an experimental correlation obtained from a literature study on orthogonal water spray impingement, yielding mean relative errors of 3.54% for the Deb model and 5.2% for the Breitenbach model across a broad range of operating conditions and surface temperatures.
Open AccessNumerical Investigation of Spray Impingement Heat Transfer in the Film Boiling Regime
Spray impingement cooling is a well-established heat removal technique employed across a wide range of industrial processes. A particularly significant cooling regime arises when the temperature of the cooled surface surpasses the Leidenfrost temperature of the spray. Developing an accurate numerical framework for this regime holds considerable potential for optimising industrial applications such as cryogenic machining and spray quenching. This paper presents a Eulerian–Lagrangian Conjugate Heat Transfer (CHT) model tailored for spray impingement under Leidenfrost conditions. Two heat transfer sub-models are incorporated to characterise droplet–solid thermal interaction: the first, developed by Breitenbach, is grounded in a theoretical analysis of the droplet impingement process, while the second, proposed by Deb, relies on a semi-empirical correlation. Both models were validated against an experimental correlation obtained from a literature study on orthogonal water spray impingement, yielding mean relative errors of 3.54% for the Deb model and 5.2% for the Breitenbach model across a broad range of operating conditions and surface temperatures.
- Open Access
Numerical Assessment of OME3 Combustion and Emission Reduction Under Oxy-Fuel Conditions in a CI Engine
The use of renewable synthetic fuels is a suitable alternative for combustion-based systems. Their implementation can reduce pollutant emissions such as soot, CO and CO2, but remains difficult to abate. The objective of this study is to evaluate the combination of Oxymethylene Ether-3 (OME3) with the oxy-fuel concept, hence operating without N2 and minimizing nitrogen oxides formation. For this purpose, advanced numerical simulations were used to investigate the effects of this strategy on combustion thermodynamics, efficiencies, and exhaust products. This model was adapted for the OME3 use, obtaining a reduction in soot production due to the fuel characteristics, but an increment of emission. To overcome this issue, the oxy-fuel concept was implemented to remove N2 from the combustion process. The numerical analysis provides insights into combustion performance to enhance the comprehension of the factors responsible for emission reductions. Preliminary results have shown the feasibility to eliminate NOx while maintaining a near-zero soot production. Further evaluations pointed out a reduction of 90% and 30% of CO and HC, respectively, with a slight improvement (1%) of the combustion efficiency (98%) and Gross Indicated Efficiency (GIE) (36%). Overall, the present study demonstrates the feasibility of the concept and highlights its potential for further optimization and experimental validation.Open AccessNumerical Assessment of OME3 Combustion and Emission Reduction Under Oxy-Fuel Conditions in a CI Engine
The use of renewable synthetic fuels is a suitable alternative for combustion-based systems. Their implementation can reduce pollutant emissions such as soot, CO and CO2, but remains difficult to abate. The objective of this study is to evaluate the combination of Oxymethylene Ether-3 (OME3) with the oxy-fuel concept, hence operating without N2 and minimizing nitrogen oxides formation. For this purpose, advanced numerical simulations were used to investigate the effects of this strategy on combustion thermodynamics, efficiencies, and exhaust products. This model was adapted for the OME3 use, obtaining a reduction in soot production due to the fuel characteristics, but an increment of emission. To overcome this issue, the oxy-fuel concept was implemented to remove N2 from the combustion process. The numerical analysis provides insights into combustion performance to enhance the comprehension of the factors responsible for emission reductions. Preliminary results have shown the feasibility to eliminate NOx while maintaining a near-zero soot production. Further evaluations pointed out a reduction of 90% and 30% of CO and HC, respectively, with a slight improvement (1%) of the combustion efficiency (98%) and Gross Indicated Efficiency (GIE) (36%). Overall, the present study demonstrates the feasibility of the concept and highlights its potential for further optimization and experimental validation. - Open Access
- 4 May 2026
- Published by MDPI AG in Preprints.org
Numerical Investigation of Spray Impingement Heat Transfer in the Film Boiling Regime
Heat removal by spray impingement is widely used in different industrial processes. A cooling regime of particular interest occurs when the temperature of the cooled surface exceeds the Leidenfrost temperature of the spray. An accurate numerical model of this cooling regime could help to optimise many industrial applications where spray cooling is used, such as cryogenic machining and spray quenching. In this paper, an Eulerian-Lagrangian Conjugate Heat Transfer (CHT) model designed for spray impingement above the Leidenfrost temperature is proposed. Two different sub-models are implemented to quantify the heat transfer between the droplet and the solid. The heat transfer models are validated through a literature experimental campaign, showing accurate and flexible prediction of heat transfer characteristics across diverse operating conditions, temperature levels, and spray configurations.
- 4 May 2026
- Published by MDPI AG in Preprints.org
Open AccessNumerical Investigation of Spray Impingement Heat Transfer in the Film Boiling Regime
Heat removal by spray impingement is widely used in different industrial processes. A cooling regime of particular interest occurs when the temperature of the cooled surface exceeds the Leidenfrost temperature of the spray. An accurate numerical model of this cooling regime could help to optimise many industrial applications where spray cooling is used, such as cryogenic machining and spray quenching. In this paper, an Eulerian-Lagrangian Conjugate Heat Transfer (CHT) model designed for spray impingement above the Leidenfrost temperature is proposed. Two different sub-models are implemented to quantify the heat transfer between the droplet and the solid. The heat transfer models are validated through a literature experimental campaign, showing accurate and flexible prediction of heat transfer characteristics across diverse operating conditions, temperature levels, and spray configurations.
- Open Access
Numerical Study of a Swirled-Type Injector for Direct-Injection Hydrogen Engines
The use of hydrogen direct injection (DI) plays a crucial role in decarbonizing internal combustion engine (ICE) technology. However, a suitable characterization of the injection process is required to control the mixture preparation before combustion, especially in the case of late injection timing. CFD modeling represents a useful tool to support experiments in addressing this goal. This study presents a numerical investigation of hydrogen DI using a swirled-type injector, seated in a constant-volume vessel. First, the selected numerical setup is validated against optical measurements of the jet penetration, demonstrating the reliability of the approach. Then, the analysis compares swirling and non-swirling configurations under different nozzle pressure ratios (nPRs) to evaluate the interaction between swirl-induced mixing and under-expanded jet structures. Results show that at lower nPR, swirl significantly alters the momentum distribution, reducing axial penetration. Instead, at higher nPR, where the H2 jets exhibit strong shock structures, the effects of swirl become negligible, with penetration and plume morphology nearly identical to non-swirling conditions. Analysis of the scalar dissipation rate showed the presence of a redistribution of mixing characteristics at low nPR due to swirl, while shock structures dominate at high nPR. This could have a significant impact on combustion and NOx emissions in ICE operated with late injection strategies, where lower nPR are found.
Open AccessNumerical Study of a Swirled-Type Injector for Direct-Injection Hydrogen Engines
The use of hydrogen direct injection (DI) plays a crucial role in decarbonizing internal combustion engine (ICE) technology. However, a suitable characterization of the injection process is required to control the mixture preparation before combustion, especially in the case of late injection timing. CFD modeling represents a useful tool to support experiments in addressing this goal. This study presents a numerical investigation of hydrogen DI using a swirled-type injector, seated in a constant-volume vessel. First, the selected numerical setup is validated against optical measurements of the jet penetration, demonstrating the reliability of the approach. Then, the analysis compares swirling and non-swirling configurations under different nozzle pressure ratios (nPRs) to evaluate the interaction between swirl-induced mixing and under-expanded jet structures. Results show that at lower nPR, swirl significantly alters the momentum distribution, reducing axial penetration. Instead, at higher nPR, where the H2 jets exhibit strong shock structures, the effects of swirl become negligible, with penetration and plume morphology nearly identical to non-swirling conditions. Analysis of the scalar dissipation rate showed the presence of a redistribution of mixing characteristics at low nPR due to swirl, while shock structures dominate at high nPR. This could have a significant impact on combustion and NOx emissions in ICE operated with late injection strategies, where lower nPR are found.
- Open Access
Numerical Study of Heavy-Duty (HD) Spark-Ignition (SI) Engine Conversion to H2-Rich Syngas Produced from Plastic Pyrolysis
This study numerically investigates the conversion of a Heavy-Duty (HD) Spark-Ignition (SI) Compressed Natural Gas (CNG) engine to operate with hydrogen-rich syngas produced from waste plastic pyrolysis. The engine was modeled with a one-dimensional simulation tool. Fuel-specific properties were included through a tabulated Laminar Flame Speed (LFS) approach, and knock occurrence was predicted with a Tabulated Kinetic of Ignition (TKI) model. Full-load simulations revealed that direct substitution of CNG with syngas leads to abnormal combustion. With adjusted values of Spark Advance (SA) to avoid knock, syngas operation resulted in average reductions of approximately 15% in brake torque and 6% in total efficiency compared to the CNG baseline. Parametric analyses showed that Late Intake Valve Closing (LIVC) provides no benefits, whereas increasing the Compression Ratio (CR) partially recovers performance and efficiency, with knock being a limiting factor. Lastly, a complete engine map of the converted configuration was generated, reporting Brake-Specific Fuel Consumption (BSFC) and emissions. Overall, the study demonstrates that HD SI engines can be operated on hydrogen-rich syngas at the cost of moderate performance penalties. Moreover, it provides a robust modeling framework to support system-level and well-to-wheel assessments of syngas-based powertrains.
Open AccessNumerical Study of Heavy-Duty (HD) Spark-Ignition (SI) Engine Conversion to H2-Rich Syngas Produced from Plastic Pyrolysis
This study numerically investigates the conversion of a Heavy-Duty (HD) Spark-Ignition (SI) Compressed Natural Gas (CNG) engine to operate with hydrogen-rich syngas produced from waste plastic pyrolysis. The engine was modeled with a one-dimensional simulation tool. Fuel-specific properties were included through a tabulated Laminar Flame Speed (LFS) approach, and knock occurrence was predicted with a Tabulated Kinetic of Ignition (TKI) model. Full-load simulations revealed that direct substitution of CNG with syngas leads to abnormal combustion. With adjusted values of Spark Advance (SA) to avoid knock, syngas operation resulted in average reductions of approximately 15% in brake torque and 6% in total efficiency compared to the CNG baseline. Parametric analyses showed that Late Intake Valve Closing (LIVC) provides no benefits, whereas increasing the Compression Ratio (CR) partially recovers performance and efficiency, with knock being a limiting factor. Lastly, a complete engine map of the converted configuration was generated, reporting Brake-Specific Fuel Consumption (BSFC) and emissions. Overall, the study demonstrates that HD SI engines can be operated on hydrogen-rich syngas at the cost of moderate performance penalties. Moreover, it provides a robust modeling framework to support system-level and well-to-wheel assessments of syngas-based powertrains.
- Open Access
- 11 February 2026
- Published by Elsevier in CIRP Journal of Manufacturing Science and Technology
- Vol. 66, 70-85
A predictive thermomechanical model for peck drilling
- 11 February 2026
- Published by Elsevier in CIRP Journal of Manufacturing Science and Technology
- Vol. 66, 70-85
Open AccessA predictive thermomechanical model for peck drilling