SEM Evaluation of the Marginal Gap of Zirconia-Reinforced Lithium Silicate Full Crowns and the Effect of Post Crystallization: An In Vitro Study
Open Access
- 4 March 2024
- journal article
- research article
- Published by MDPI AG in Dentistry Journal
- Vol. 12 (3) , 61
Abstract
Background: This study compared the influence of crystallization on marginal gap adaptation by using computer-aided design and manufacturing (CAD-CAM) for producing monolithic zirconia-reinforced lithium silicate (ZLS) ceramic crowns. Methods: A total of 25 plastic teeth were scanned using a Primescan intra-oral scanner (IOS), and ZLS crowns were ground. For each unit (abutment and crown), the marginal gap was evaluated pre crystallization and post crystallization at four regions of interest through the use of a scanning electron microscope (SEM). To compare the marginal gap between the two groups, a Kolmogorov–Smirnov test performed on the study variables indicated a normal distribution (p > 0.05) followed by paired samples T-tests (α = 0.0005). Results: After crystallization, there were significantly higher circumferential marginal gaps (CMGs) for all four surfaces (distal (p = 0.0005), mesial (p = 0.0005), palatal (p = 0.0005), and buccal (p = 0.0005)). The total mean marginal gap (MMG) revealed a significantly higher result for the post-crystallization group (79.82 ± 7.86 μm) compared to the pre-crystallization group (24.25 ± 5.49 μm). Conclusions: The post-crystallization group showed a significantly higher marginal gap compared to the pre-crystallization group in all parameters, but both groups were in the clinically accepted threshold (® DUO crowns and achieve better mechanical properties but significantly increase the marginal gap.Keywords
This publication has 46 references indexed in Scilit:
- Zirconia-reinforced lithium silicate (ZLS) mechanical and biological properties: A literature reviewJournal of Dentistry, 2021
- Seeing is believing? When scanning electron microscopy (SEM) meets clinical dentistry: The replica technique.Microscopy Research and Technique, 2020
- Influence of minimal extended firing on dimensional, optical, and mechanical properties of crystalized zirconia-reinforced lithium silicate glass ceramicJournal of the Mechanical Behavior of Biomedical Materials, 2020
- Impact of crystallization firing process on the microstructure and flexural strength of zirconia-reinforced lithium silicate glass-ceramicsDental Materials, 2018
- Diagnostic accuracy of conventional and digital radiography for detecting misfit between the tooth and restoration in metal-restored teethThe Journal of Prosthetic Dentistry, 2015
- A comparison of the marginal fit of crowns fabricated with digital and conventional methodsThe Journal of Prosthetic Dentistry, 2014
- Marginal and internal fits of fixed dental prostheses zirconia retainersDental Materials, 2009
- Effect of finish line variants on marginal accuracy and fracture strength of ceramic optimized polymer/fiber-reinforced composite crownsThe Journal of Prosthetic Dentistry, 2004
- A standardized method for determination of crown margin fidelityThe Journal of Prosthetic Dentistry, 1990
- Considerations in measurement of marginal fitThe Journal of Prosthetic Dentistry, 1989