Study the effects of nitrogen ion implantation on structural and mechanical properties of AA7075
- 25 June 2018
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (7) , 076507
Abstract
Nitrogen ions were implanted on the Aluminum Alloy 7075-T6 to study the structural and mechanical properties. The implantation was carried out at energy 1 MeV with ion doses ranging from 8×1014, 1.2×1015 and 5.2×1015 ions/cm2. Structural analysis of all the samples was done by X-ray Diffractometer (XRD) for the implanted ions. Surface morphology of all the samples was studied by Scanning Electron Microscopy (SEM). Changes in the surface and structure are directly related to the dose of ion implantation. To understand the mechanical properties Universal Tensile Testing Machine was applied. Modifications in the crystalline structure of the material exhibit new properties to the lattice site. Effects on the crystallite size and stress generated by the damage strongly vary the yield stress, ultimate tensile strength and percentage elongation of the material. Hardness was tested by the Vickers Micro Hardness Tester. The result shows that the surface hardness obtained at room temperature by implanting nitrogen ions initially decreases and then systematically increases due to subsequent damage. Graph representing yield stress, ultimate tensile strength and hardness are strongly agreed with each other. The micro structure indicates the fractured surface after Tensile Test.Keywords
This publication has 20 references indexed in Scilit:
- A Study on Surface Modification of Al7075-T6 Alloy against Fretting Fatigue PhenomenonAdvances in Materials Science and Engineering, 2014
- Effect of laser fluence on surface, structural and mechanical properties of Zr after irradiation in the ambient environment of oxygenThe European Physical Journal D, 2013
- Effect of nitrogen and molybdenum ion implantation in the tribological behavior of AA7075 aluminum alloyWear, 2012
- An effect of N+ ion bombardment on the properties of CdTe thin filmsRadiation Physics and Chemistry, 2012
- Tribological changes on SS304 stainless steel induced by nitrogen plasma immersion ion implantation with and without auxiliary heatingApplied Surface Science, 2009
- Low energy oxygen implantation induced improved crystallinity and optical properties of surface modified ZnO single crystalsApplied Surface Science, 2009
- Tribological properties of Ti-implanted duralumin and stainless steelVacuum, 2002
- Tribological properties of ion implanted Aluminum alloysVacuum, 1999
- Saturated thickness of nitride layers formed by high fluence nitrogen implantation into metalsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1997
- Mechanical behaviour of nitrogen-implanted aluminium alloysSurface and Coatings Technology, 1996