A 280–310 GHz InAlAs/InGaAs mHEMT Power Amplifier MMIC with 6.7–8.3 dBm Output Power
- 24 December 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 29 (2) , 143-145
Abstract
This letter presents a broadband power amplifier (PA) millimeter-wave integrated circuit (MMIC) demonstrating 6.7-8.3-dBm measured output power from 280 to 310 GHz at -5-dBm input power. The measured small-signal gain is 15-20 dB for 266-330 GHz, which is the maximum frequency that could be measured. A dc power of 521 mW is required for this four-stage amplifier circuit using four cascode amplifier cells in parallel. The cascode PA cell is implemented with thin-film microstrip lines on the wafer front side using two two-finger devices with 10-μm finger width in parallel. Due to the compact cascode cell topology, the total gate width of 160 μm is realized requiring only 400 μm x 800 μm chipsize for the four-stage amplifier without pads. The reported output power represents the state of the art for mHEMT-based PA MMICs between 280 and 310 GHz.Keywords
This publication has 9 references indexed in Scilit:
- In situ Load- Pull MMIC for Large-Signal Characterization of mHEMT Devices at Submillimeter- Wave Frequencies2018
- Small signal modelling approach for submillimeter wave III–V HEMTs with analysation and optimization possibilities2016
- Submillimeter-Wave Amplifier Circuits Based on Thin Film Microstrip Line Front-Side Technology2015
- A 6–10 mW Power Amplifier at 290–307.5 GHz in 250 nm InP HBTIEEE Microwave and Wireless Components Letters, 2015
- H-Band Power Amplifier Integrated Circuits Using 250-nm InP HBT TechnologyIEEE Transactions on Terahertz Science and Technology, 2015
- A Broadband 220-320 GHz Medium Power Amplifier Module2014
- 300 GHz InP HBT amplifier with 10 mW output powerElectronics Letters, 2014
- A 10-mW Submillimeter-Wave Solid-State Power-Amplifier ModuleIEEE Transactions on Microwave Theory and Techniques, 2010
- 35 nm metamorphic HEMT MMIC technology2008