Influence of sputtering mechanisms on the preferred orientation of aluminum nitride thin films
Authors:
- 1 August 2003
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 94 (3) , 1495-1500
Abstract
This article presents a study of the influence of the sputtering parameters on the preferred orientation of polycrystalline aluminum nitride thin films. Aluminum nitride films were grown by rf reactive sputtering of an aluminum target in an gas mixture for different values of the deposition parameters: total pressure, nitrogen content in the discharge gas, and substrate bias voltage. The preferred orientation of the films was analyzed by x-ray diffraction. Films with different preferred orientations were obtained, ranging from c-axis oriented films to films with the c axis tilted by up to 61.6° from the substrate normal. The different mechanisms influencing the preferred orientation of the films have been considered, especially the transfer of energy to the adatoms on the substrate by particle bombardment. An analysis of the relation between the deposition parameters and the crystal orientation has allowed us to determine the relative importance of the different particles in the supply of energy to the substrate. We have found that Ar ion bombardment of the film during growth is the most influential mechanism on the preferred orientation of the films. As bombardment becomes more energetic, microcrystals in the film tend to grow with the c axis along the surface normal. The energy of Ar bombardment can be best controlled through the substrate bias voltage, a characteristic that we have employed to obtain AlN films exhibiting pure (00.2) preferred orientation and rocking curves with a full width at half maximum as low as 4.2°.
Keywords
This publication has 20 references indexed in Scilit:
- Reactive DC magnetron sputtering of aluminum nitride films for surface acoustic wave devicesDiamond and Related Materials, 2002
- Synthesis of C-Axis-Oriented Aluminum Nitride Films by Reactive RF Magnetron Sputtering for Surface Acoustic WaveJapanese Journal of Applied Physics, 2001
- Stress and piezoelectric properties of aluminum nitride thin films deposited onto metal electrodes by pulsed direct current reactive sputteringJournal of Applied Physics, 2001
- Optical and structural properties of highly c-axis oriented aluminum nitride prepared by sputter-deposition in pure nitrogenThin Solid Films, 2000
- Synthesis of highly oriented piezoelectric AlN films by reactive sputter depositionJournal of Vacuum Science & Technology A, 2000
- Preparation of highly oriented AlN thin films on glass substrates by helicon plasma sputtering and design of experimentsThin Solid Films, 1999
- Control of preferential orientation of AlN films prepared by the reactive sputtering methodThin Solid Films, 1998
- Preparation of Aluminum Nitride Epitaxial Films by Electron Cyclotron Resonance Dual-Ion-Beam SputteringJapanese Journal of Applied Physics, 1994
- Properties and ion implantation of AlxGa1−xN epitaxial single crystal films prepared by low pressure metalorganic chemical vapor depositionApplied Physics Letters, 1983
- Growth morphology and surface-acoustic-wave measurements of AIN films on sapphireJournal of Applied Physics, 1975