Can Interface Traps Suppress TFET Ambipolarity?
- 30 October 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 34 (12) , 1557-1559
Abstract
The impact of semiconductor/oxide interface traps (ITs) on the turn-on characteristics of tunnel field-effect transistors (TFETs) is carefully investigated through TCAD. IT density is treated as a 2-D continuum. Both a conventional and an advanced nanowire TFET, designed to fulfill ITRS specs, are addressed. Surprisingly, in conventional TFETs, high concentrations of acceptor-like ITs can suppress device ambipolarity, thus reducing transistor's OFF-state current.Keywords
This publication has 12 references indexed in Scilit:
- Drain-conductance optimization in nanowire TFETs by means of a physics-based analytical modelSolid-State Electronics, 2013
- Impact of interface traps on the IV curves of InAs Tunnel-FETs and MOSFETs: A full quantum study2012
- InAs–Si Nanowire Heterojunction Tunnel FETsIEEE Electron Device Letters, 2012
- Al2O3/InAs metal-oxide-semiconductor capacitors on (100) and (111)B substratesApplied Physics Letters, 2012
- Comparison of methods to quantify interface trap densities at dielectric/III-V semiconductor interfacesJournal of Applied Physics, 2010
- Effect of interface states on sub-threshold response of III–V MOSFETs, MOS HEMTs and tunnel FETsSolid-State Electronics, 2010
- Effect of Interface Traps and Oxide Charge on Drain Current Degradation in Tunneling Field-Effect TransistorsIEEE Electron Device Letters, 2010
- Empirical low-field mobility model for III–V compounds applicable in device simulation codesJournal of Applied Physics, 2000
- A new recombination model for device simulation including tunnelingIEEE Transactions on Electron Devices, 1992
- Theory of TunnelingJournal of Applied Physics, 1961