Effect of Chemical Structure and Network Formation on Physical Properties of Di(Cyanate Ester) Thermosets
- 6 February 2012
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 4 (2) , 527-535
Abstract
Key physical properties of three dicyanate ester monomers, bisphenol A dicyanate (BADCy), bisphenol E dicyanate (LECy), and the dicyanate of a silicon-containing analogue of bisphenol A (SiMCy) were investigated as a function of cyanurate conversion at conversions ranging from approximately 70% to greater than 90% in order to assess the range of applicability of both traditional and more unusual structure-property-process relationships known for cyanate ester resins. A more complete understanding of these relationships is essential for the continued development of cyanate ester resins and their composites for a wide variety of aerospace applications. The degree of cure in each system was determined by differential scanning calorimetry (DSC). The degree of conversion achieved at a given temperature was dependent on the structure of the repeat unit, with SiMCy displaying the highest relative ease of cure. The density at room temperature was found to decrease monotonically with increasing conversion for all monomer types studied. In contrast, the water uptake decreased with increasing cure for all three materials over most or all of the conversion range studied, but leveled off or began to increase with increasing conversion at conversions of approximately 90%. The T(g) decreased after exposure to hot water in resins with greater than 85% conversion, but unexpectedly increased in samples with lower conversions. An investigation of the effect of hot water exposure on network chemistry via infrared spectroscopy indicated that carbamate formation varied with both monomer chemistry and extent of cure, but was greatest for the BADCy polycyanurates. On the other hand, the unreacted cyanate ester band tended to disappear uniformly, suggesting that reactions other than carbamate formation (such as cyclotrimerization) may also take place during exposure to hot water, possibly giving rise to the observed unusual increases in T(g) upon exposure.Keywords
This publication has 30 references indexed in Scilit:
- Status Report on the Toroidal Field Coils for the ITER ProjectIEEE Transactions on Applied Superconductivity, 2010
- Cyanate Ester Resins, Recent Developments2007
- Thermal and mechanical evaluation of cyanate ester composites with low-temperature processabilityComposites Part A: Applied Science and Manufacturing, 2007
- Curing behavior and thermal mechanical properties of cyanate ester blendsJournal of Applied Polymer Science, 2006
- Cure kinetics of a cyanate ester blended with poly(phenylene oxide)Polymer International, 2006
- Synthesis, characterization, and properties of novel epoxy resins and cyanate estersJournal of Polymer Science Part A: Polymer Chemistry, 2006
- FTIR isothermal cure kinetics and morphology of dicyanate ester resin/polysulfone blendsEuropean Polymer Journal, 2005
- Polycyanate esters: Science and applicationsProgress in Polymer Science, 1995
- Chemistry and Technology of Cyanate Ester Resins1994
- High-resolution carbon-13 and nitrogen-15 NMR investigations of the mechanism of the curing reactions of cyanate-based polymer resins in solution and the solid stateMacromolecules, 1992