Durability of reclaimed asphalt pavement–coal fly ash–carbide lime blends under severe environmental conditions
- 9 August 2018
- journal article
- research article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 21 (2) , 557-569
Abstract
The sustainable use of industrial residue in enhancing the long-term performance of reclaimed asphalt pavement (RAP) has been proven to be effective under freeze–thaw and wet–dry conditions. This study focuses on coal fly ash (FA) and carbide lime (CL) as the enhancing agents. It evaluates how the durability and long-term performance of compacted RAP–FA–CL mixtures are impacted by dry unit weight and lime content. The tested mixture’s specimens were moulded in three layers through static compaction inside a cylindrical mould. Several single-level variables were used in the stabilisation process. Among these were: FA content of 25%, optimum water content of 9% (modified effort) and seven days of curing. Additionally, three target dry unit weights (17, 18 and 19 kN/m3 – the last of which was determined using the modified Proctor energy) and three percentages of lime content (3%, 5% and 7%) were used for a comparative analysis. The tested specimens’ accumulated loss of mass (after wetting–drying and freezing–thawing cycles) and splitting tensile strength were both evaluated as a function of the porosity/lime index. The experiments revealed that compacted RAP–coal FA–CL mixtures performed noticeably worse when subjected to freezing–thawing cycles than when subjected to wetting–drying cycles. These results indicate an increase in the breadth of the porosity/lime index, as it is shown to control the long-term performance of compacted RAP–coal FA–CL mixtures, in addition to controlling their mechanical response.Keywords
Funding Information
- FAPERGS
- CNPq
This publication has 13 references indexed in Scilit:
- Key parameters controlling dynamic modulus of crushed reclaimed asphalt paving–powdered rock–Portland cement blendsRoad Materials and Pavement Design, 2017
- Single model establishing strength of dispersive clay treated with distinct bindersCanadian Geotechnical Journal, 2016
- Durability, Strength, and Stiffness of Dispersive Clay–Lime BlendsJournal of Materials in Civil Engineering, 2016
- Durability and long term performance of geopolymer stabilized reclaimed asphalt pavement base coursesConstruction and Building Materials, 2016
- Durability against Wetting–Drying Cycles of Water Treatment Sludge–Fly Ash Geopolymer and Water Treatment Sludge–Cement and Silty Clay–Cement SystemsJournal of Materials in Civil Engineering, 2016
- Coal fly ash–carbide lime bricks: An environment friendly building productConstruction and Building Materials, 2014
- Variables Governing Strength of Compacted Soil–Fly Ash–Lime MixturesJournal of Materials in Civil Engineering, 2011
- Key Parameters for the Strength Control of Lime Stabilized SoilsJournal of Materials in Civil Engineering, 2009
- Mineralogical Characterizations and Reaction Path Modeling of the Pozzolanic Reaction of Fly Ash–Lime SystemsJournal of the American Ceramic Society, 2008
- Freezing effect on shear strength of clayey soilsApplied Clay Science, 1997