A Rock-on-a-Chip Approach to Study Fluid Invasion and Flowback in Liquids-Rich Shale Formations
- 27 March 2017
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Understanding the dynamic process of fluid invasion and flowback has significant technological implications in developing shale plays. One of the physical models used to study this process is coreflooding, which mimics the process of fracturing fluid invasion, flowback, and hydrocarbon recovery from shale formations. However, coreflooding is time consuming, expensive, and unable to provide insights to the underlying physics at the pore scale level in most instances. Rock-on-a Chip (ROC), based on microfluidic technology, is an emerging approach that provides a new method to study fracturing fluid invasion and flowback affected by the petrophysical properties using direct visualization and measurement. In this study, the porous matrix, representing shale formations, and single large channel, representing hydraulic fractures or natural fractures, were defined in an oil-wet microfluidic chip; the drainage-imbibition cycles that are analogous to fracturing fluid invasion and subsequent flowback were measured by optical microscopy. Specifically, the effect of interfacial tension and fracture patterns ("half" fracture and "S" fracture) on the fluid invasion factor and flowback efficiency was examined. The results show that the invasion factor and flowback efficiency correlated well with the capillary pressure of fracturing fluids. In addition, model fractures have a major effect on the flowback. In particular, the invasion factor and flowback efficiency of the water-based fracturing fluids were significantly impaired in the "S" fracture pattern, as compared to homogeneous and half fracture patterns. Notably, by improving fluid mobility between the porous matrix and fractures, the addition of a surfactant to the fracturing fluids significantly enhanced the fluid invasion and flowback in all of the fracture patterns. The results demonstrate that the ROC model proposed in this work can be used to study the flowback process affected by properties such as wettability, permeability, initial water saturation, and reservoir pressure. Consequently, it has potential for guiding water management and chemical treatment in hydraulic fracturing.Keywords
This publication has 10 references indexed in Scilit:
- Evaluation of surfactant performance in fracturing fluids for enhanced well productivity in unconventional reservoirs using Rock-on-a-Chip approachJournal of Petroleum Science and Engineering, 2015
- Enhancing Hydrocarbon Permeability After Hydraulic Fracturing: Laboratory Evaluations of Shut-ins and Surfactant Additives2015
- Flowback patterns of fractured shale gas wellsNatural Gas Industry B, 2015
- When Less Flowback is More: A Mechanism of Permeability Damage and Its Implications on the Application of EOR Techniques2015
- Effect of pore geometry and interfacial tension on water-oil displacement efficiency in oil-wet microfluidic porous media analogsPhysics of Fluids, 2014
- Imbibition and Water Blockage in Unconventional Reservoirs: Well Management Implications During Flowback and Early Production2014
- Impact of Delays and Shut-Ins on Well Productivity2013
- Impact of Liquid Loading in Hydraulic Fractures on Well Productivity2013
- Experimental Study of Design Parameters in Silicon Micropillar Array Solar Cells Produced by Soft Lithography and Metal-Assisted Chemical EtchingIEEE Journal of Photovoltaics, 2012
- Single- and two-phase flow in microfluidic porous media analogs based on Voronoi tessellationLab on a Chip, 2011