Solidification and Precipitation Microstructure Simulation of a Hypereutectic Al–Mn–Fe–Si Alloy in Semi-Quantitative Phase-Field Modeling with Experimental Aid
Open Access
Abstract
In this study, microstructural evolution during solidification of a hypereutectic Al–Mn–Fe–Si alloy was investigated using semi-quantitative two-/three-dimensional phase-field modeling. The formation of facetted Al6Mn precipitates and the temperature evolution during solidification were simulated and experimentally validated. The temperature evolution obtained from the phase-field simulation, which was balanced between extracted heat and latent heat release, was compared to the thermal profile of the specimen measured during casting to validate the semi-quantitative phase-field simulation. The casting microstructure, grain morphology, and solute distribution of the specimen were analyzed using electron backscatter diffraction and energy-dispersive spectroscopy and compared with the simulated microstructure. The simulation results identified the different Fe to Mn ratios in Al6(Mnx,Fe1−x) precipitates that formed during different solidification stages and were confirmed by energy-dispersive spectroscopy. The precipitates formed in the late solidification stage were more enriched with Fe than the primary precipitate due to solute segregation in the interdendritic channel. The semi-quantitative model facilitated a direct comparison between the simulation and experimental observations.Keywords
Funding Information
- Korea Institute of Materials Science (PNK7070)
- National Research Foundation of Korea (2020R1A2C2008416)
This publication has 25 references indexed in Scilit:
- 3-D morphology and growth mechanism of primary Al6Mn intermetallic compound in directionally solidified Al-3at.%Mn alloyIntermetallics, 2012
- Effect of Concurrent Precipitation on Recrystallization and Evolution of the P-Texture Component in a Commercial Al-Mn AlloyMetallurgical and Materials Transactions A, 2010
- Phase-field simulation of microstructure formation in technical castings – A self-consistent homoenthalpic approach to the micro–macro problemJournal of Computational Physics, 2009
- Phase-field models in materials scienceModelling and Simulation in Materials Science and Engineering, 2009
- Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical applicationPhysical Review E, 2006
- Phase field simulation of equiaxed solidification in technical alloysActa Materialia, 2006
- Thermo-Calc & DICTRA, computational tools for materials scienceCalphad, 2002
- Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al–Ti–BActa Materialia, 2000
- Orientation relationship between Al6Mn precipitates and the Al matrix during continuous recrystallization in Al–1.3%MnJournal of Applied Crystallography, 1999
- Precipitation hardening of aluminum alloysMetallurgical Transactions A, 1975