Evaluation of the Biodegradability of a Composite Material Reinforced with Cellulose Acetate Nanofibers
Open Access
Abstract
The development of biodegradable composite materials offers a sustainable alternative to conventional synthetic polymers, particularly in short-lived applications. In this context, the incorporation of nanoscale reinforcements can improve mechanical properties without compromising the material’s degradability. The purpose of this study was to evaluate the composting behavior of a composite material based on low-density polyethylene (LDPE), potato starch, and cellulose acetate nanofibers (NFCA). The material’s degradability and mechanical stability were analyzed over 180 days according to the ASTM D5988 standard. The nanofibers were produced via electrospinning, yielding an average diameter of approximately 85 nm. The composite material was prepared using twin-screw extrusion followed by injection molding to produce ASTM D638 test specimens. The effects of biodegradation were evaluated through mass loss, CO2 generation in a desiccator, tensile testing, Shore D hardness measurements, and microstructural analysis via scanning electron microscopy (SEM). The results demonstrated a progressive increase in CO2 generation, particularly in the reinforced formulations (up to 111.76%). The formulation containing 3% NFCA exhibited the greatest mass loss (20.28%). Tensile testing revealed moderate reductions in maximum stress (1.66–8.44%), whereas hardness increased by up to 5.4% in the reinforced formulations. SEM analysis revealed increased porosity as the composting period progressed. The findings suggest that the incorporation of NFCA enhances biodegradative performance, as evidenced by increased CO2 evolution, mass loss, and morphological changes during composting.Keywords
Funding Information
- Universidad Pedagógica y Tecnológica de Colombia (SGI 3746)
This publication has 15 references indexed in Scilit:
- Cellulose Nanocrystal Composites with Enhanced Mechanical Properties for Robust Transparent Thin FilmsACS Applied Nano Materials, 2023
- Biodegradation of LDPE_TPS blends under controlled composting conditionsPolymer Bulletin, 2022
- Biodegradable nano composite reinforced with cellulose nano fiber from coconut industry waste for replacing synthetic plastic food packagingChemosphere, 2022
- Tailoring the low-density polyethylene - thermoplastic starch composites using cellulose nanocrystals and compatibilizerPolymer Testing, 2021
- A review on the extraction of pineapple, sisal and abaca fibers and their use as reinforcement in polymer matrixExpress Polymer Letters, 2020
- Langmuir–Blodgett Procedure to Precisely Control the Coverage of Functionalized AFM Cantilevers for SMFS Measurements: Application with Cellulose NanocrystalsLangmuir, 2018
- Preparation and characterization of thermoplastic starch and cellulose nanofibers as green nanocomposites: Extrusion processingInternational Journal of Biological Macromolecules, 2018
- Obtention of Cellulose Acetate Nanofibers From Sugar Cane BagasseCIENCIA EN DESARROLLO, 2017
- Comparative Biodegradation in Soil Behaviour of two Biodegradable Polymers Based on Renewable ResourcesJournal of Polymers and the Environment, 2010
- Fatiga de los erectores lumbares tras un maratón: estudio de caso únicoRevista Iberoamericana de Fisioterapia y Kinesiología, 2009