Evaluation of the performance characteristics of aerostatic bearing with porous alumina (Al2O3) membrane using theoretical and experimental methods
- 13 April 2024
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 238 (10) , 1187-1197
Abstract
Instruments with high levels of precision commonly use aerostatic bearings. Moreover, the use of porous (Al2O3 membrane) material validates that the pressure is spread uniformly throughout the air film region. The impression of applied load on the thickness of the air film of the aerostatic bearings was evaluated using a certain experimental technique. As the applied load rises, the thickness of the air film expands, and as the compressive stress rises, it contracts. The theoretical model parameters were set using the experimental stipulations. It was discovered that the theoretical model and the experimental data were consistent. The pressure gradient induced in the air film and the air bearings’ capacity for carrying loads were calculated using a theoretical simulation. The results of theoretical modeling and experimental comparison of the different characteristics of porous (Al2O3 membrane) aerostatic bearings based on stiffness and load-carrying capacity are graphically illustrated in this study. Porous aerostatic bearings with Al2O3 membranes have a number of potential applications, including high-speed spindles, precision instruments, microelectromechanical systems, vacuum pumps, cryogenic applications, etc.Keywords
This publication has 20 references indexed in Scilit:
- Recent advances in tribology of high entropy alloys: A critical reviewProgress in Materials Science, 2023
- Air permeability and tensile properties of novel micron-scale gradient porous plates fabricated by rolling and vacuum sinteringPowder Technology, 2022
- Macroscale to Nanoscale Tribology of Magnesium-Based Alloys: A ReviewTribology Letters, 2022
- Influence of manufacturing errors and misalignment on the performances of air journal bearings considering inertia effects based on SUPG finite element methodMeasurement, 2022
- Effect of preparation conditions on gas permeability parameters of porous SiC ceramicsJournal of the European Ceramic Society, 2021
- Study on static performance of gas-lubricated thrust bearing based on multi-microporous stainless steel plateJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2021
- Permeating behaviour of porous SiC ceramics fabricated with different SiC particle sizesCeramics International, 2021
- Towards an improved understanding of plasticity, friction and wear mechanisms in precipitate containing AZ91 Mg alloyMaterialia, 2020
- Permeability of the porous Al2O3 ceramic with bimodal pore size distributionCeramics International, 2019
- A fractal method to calculate the permeability for compressible gas flow through a porous restrictor in aerostatic bearingsInternational Journal of Heat and Mass Transfer, 2018