Experimental investigation of wire EDM parameters during machining of fabricated hybrid Al/(SiC+ZrO 2 +NiTi)-MMC
- 16 August 2022
- journal article
- review article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 10 (2) , 187-197
Abstract
Nowadays, advanced engineering materials are gradually becoming more attractive to the industries because of their high fatigue strength, hardness, thermal shock resistance, attractive strength to weight ratio, etc. Aluminium metal matrix composites (MMCs) have such properties and good electrical conductivity. Therefore, wire electrical discharge machining (WEDM) was found to be a suitable process for machining of such materials. The open gap voltage, pulse-on-time, pulse-off-time, peak current, wire feed rate and wire tension were considered as input process parameters, and experiments were carried out on fabricated hybrid Al/(SiC+ZrO2+ NiTi)-MMC. Taguchi method-based L18 (21x37) mixed orthogonal array was employed for planning of experiments. The process parameters were optimised for material removal rate (MRR) and surface roughness (SR) heights. Confirmation results reveals 61.88%, −28.75% and −20.25% improvement in MRR, Ra and Rt respectively, over initial setting. From analysis of variance (ANOVA), open gap voltage and pulse-on-time were found significant parameters for MRR and SR. The mathematical models for MRR and SR were developed and confirmation test reveals good agreement of it with experimental results. Scanning electron microscopy images reveal that the recast layer thickness was 8.569 µm at optimal MRR setting and 6.113 µm at optimal surface roughness (Ra) setting.Keywords
This publication has 25 references indexed in Scilit:
- Multi-response optimization of wire electrical discharge machining process parameters for Al7075/Al2O3/SiC hybrid composite using Taguchi-based grey relational analysisProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014
- Experimental Investigation and Optimization of Wire EDM Parameters for Surface Roughness, MRR and White Layer in Machining of Aluminium AlloyProcedia Materials Science, 2014
- Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix compositeJournal of Manufacturing Processes, 2013
- Optimization of process parameters in wire electrical discharge machining of TiB2 nanocomposite ceramicProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011
- Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectricApplied Surface Science, 2011
- Experimental study on fabrication of Al—Al2O3/Grp metal matrix compositesJournal of Composite Materials, 2011
- Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMCJournal of Materials Processing Technology, 2008
- Examination of wire electrical discharge machining of Al2O3p/6061Al compositesInternational Journal of Machine Tools and Manufacture, 2005
- A study on machinability of Al/SiC-MMCJournal of Materials Processing Technology, 2003
- An Examination of Wire Electrical Discharge Machining (WEDM) of Al2O3Particulate Reinforced Aluminum Based CompositesMaterials and Manufacturing Processes, 1996