Sensitivity analysis and optimization on effective parameters during chemical enhanced oil recovery (CEOR) using experimental design and numerical simulation
- 28 November 2018
- journal article
- research article
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 41 (15) , 1847-1861
Abstract
Several factors effect on choosing the best enhanced oil recovery process in a hydrocarbon reservoir. In the present study, effective factors on chemical enhanced oil recovery involved in polymer flooding, surfactant flooding, surfactant–polymer flooding, and alkaline–surfactant–polymer flooding are discussed in numerical simulation. The numbers of the simulation runs are estimated based on the number of factors and their maximum and minimum values using experimental design software. Oil recovery factor from reservoir simulation is considered as comparison factor in all of the run cases. The results from one parameter and two interaction factors during each flooding case were analyzed by Tornado and Parto plot. The oil recovery factor also was estimated using statistical analysis using Minitab. The results show that there is a strong correlation between simulation and statistical analysis. Furthermore, the results show that each selected factor has a different effect on oil recovery in each case of chemical flooding. The case study results on two Iranian oil fields at the end of the present study clarified that results of this study can be useful for selecting the best chemical process for oil reservoir based on reservoir properties.Keywords
This publication has 20 references indexed in Scilit:
- Aqueous Hybrids of Silica Nanoparticles and Hydrophobically Associating Hydrolyzed Polyacrylamide Used for EOR in High-Temperature and High-Salinity ReservoirsEnergies, 2014
- Modeling of surfactant and surfactant–polymer flooding for enhanced oil recovery using STARS (CMG) softwareJournal of Petroleum Exploration and Production Technology, 2014
- Development of an Analytical Injectivity Model for Non-Newtonian Polymer SolutionsSPE Journal, 2014
- Experimental investigation of adsorption of a new nonionic surfactant on carbonate mineralsFuel, 2013
- Rheology and polymer flooding characteristics of partially hydrolyzed polyacrylamide for enhanced heavy oil recoveryJournal of Applied Polymer Science, 2012
- A Novel Thermoviscosifying Water-Soluble Polymer for Enhancing Oil Recovery from High-Temperature and High-Salinity Oil ReservoirsAdvanced Materials Research, 2011
- Effect of fatty acids, water composition and pH on the wettability alteration of calcite surfaceJournal of Petroleum Science and Engineering, 2006
- Spontaneous Imbibition of Aqueous Surfactant Solutions into Neutral to Oil-Wet Carbonate Cores: Effects of Brine Salinity and CompositionEnergy & Fuels, 2003
- EOR Screening Criteria Revisited— Part 1: Introduction to Screening Criteria and Enhanced Recovery Field ProjectsSPE Reservoir Engineering, 1997
- Planning and Implementing a Large-Scale Polymer FloodJournal of Petroleum Technology, 1985