Effect of T6I6 tempering on the coherence between core/shell precipitates and a solid solution in the 2024 aluminium alloy
Open Access
- 19 July 2024
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (8) , 086503
Abstract
Heat treatment of materials, including—in particular—two-stage T6I6 treatment, enables the nucleation of precipitates with a two-phase structure: core and shell. The above-mentioned treatment can be used to harden materials by selecting suitable treatment parameters and the chemical composition of the material that initiates a selective diffusion of the alloying elements. In this paper, tests of the T6I6 treatment were carried out on the EN AW-2024 alloy. The aluminium alloy was subjected to T6I6 treatment, and then the element distribution map was examined within the precipitate using the EDS method. The mechanical properties of the precipitate were tested using the nanoindentation method, and the kinetics of the formation of the precipitate were analysed using DSC. The impact of two-phase precipitates on the mechanical properties was determined through a static strength test, whereas the impact of the structure on the above-mentioned mechanical properties was determined based on HR-TEM observations. The results of the study confirmed the formation of a precipitate with a two-phase structure (shell; core) in the EN AW-2024 alloy, as well as the kinetics of their formation as a function of the parameters of the T6I6 process, such as temperature, duration and cooling rate. Strength tests confirmed an increase in the strength of the alloy to Rm = 520 MPa, with elongation remaining the same at A = 13.2%. HR-TEM observations, in turn, proved that the shell forming on the core is coherent with solid solution α, which means that the hardening of the alloy may occur as a sum of the Mott-Nabarro, Friedel and Ashby-Orowan mechanisms.Keywords
Funding Information
- Polish State Committee for Scientific Research (2013/07/N/ST8/03520)
This publication has 24 references indexed in Scilit:
- Correlation between stress corrosion cracking resistance and grain-boundary precipitates of a new generation high Zn-containing 7056 aluminum alloy by non-isothermal aging and re-aging heat treatmentJournal of Alloys and Compounds, 2021
- Coarsening kinetics and strengthening mechanisms of core-shell nanoscale precipitates in Al-Li-Yb-Er-Sc-Zr alloyJournal of Materials Science & Technology, 2021
- Si-mediated reassembly of interfacially segregated Sc atoms in an Al–Cu–Sc alloy exposed to high-temperature creepJournal of Alloys and Compounds, 2020
- The direct observation of copper segregation at the broad faces of η′ and η precipitates in AA7010 aluminium alloyMaterials Characterization, 2020
- Effect of core/shell precipitations on fatigue strength of 2024-T6I6 alloyInternational Journal of Fatigue, 2019
- Effect of Zr and Sc on microstructure and properties of 7136 aluminum alloyJournal of Materials Research and Technology, 2019
- Microstructural characterization of interrupted aging on an AA7050 aluminum alloyMaterials Characterization, 2019
- Structures and tensile properties of Sc-containing 1445 Al-Li alloy sheetJournal of Alloys and Compounds, 2018
- First-principles study of the nucleation and stability of ordered precipitates in ternary Al–Sc–Li alloysActa Materialia, 2011
- Effects of Li additions on precipitation-strengthened Al–Sc and Al–Sc–Yb alloysActa Materialia, 2011