Development of an automated underwater abrasion rig to determine galvanic effects during the growth and localised breakdown of surface films in CO2-containing solutions
- 1 March 2019
- journal article
- research article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 90 (3) , 034101
Abstract
This paper outlines the development of an automated underwater abrasion rig to assist in understanding the galvanic interaction induced by surface films when continuous localised mechanical film breakdown is encountered on the surface of carbon steel in CO2-containing environments. The rig enables the measurement of galvanic current between a small X65 steel pin and a larger steel specimen, as well as the intrinsic corrosion rate of an additional, uncoupled larger specimen. The surface film developed on the pin is removed periodically using an automated reciprocating and rotating shaft with a sand paper grit pad attached to the base, while the surface film is allowed to establish itself undisrupted on the large specimen. The setup essentially simulates a tribo-corrosion process where local removal of material occurs within a carbon steel pipeline as a result of periodic sand particle impingement. Initial results focus on validating the reproducibility of the technique, as well as determining the galvanic effects associated with iron carbide and iron carbonate for two model sets of conditions to highlight the capabilities of the system.Keywords
Funding Information
- European Research Council (742930)
This publication has 20 references indexed in Scilit:
- A review of iron carbonate (FeCO3) formation in the oil and gas industryCorrosion Science, 2018
- A Study of the Pitting and Uniform Corrosion Characteristics of X65 Carbon Steel in Different H2S-CO2-Containing EnvironmentsCorrosion, 2018
- Pitting and Uniform Corrosion of X65 Carbon Steel in Sour Corrosion Environments: The Influence of CO2, H2S, and TemperatureCorrosion, 2017
- The Influence of pH on Localized Corrosion Behavior of X65 Carbon Steel in CO2-Saturated BrinesCorrosion, 2015
- Understanding Pitting Corrosion Behavior of X65 Carbon Steel in CO2-Saturated Environments: The Temperature EffectCorrosion, 2015
- Investigation of the Galvanic Mechanism for Localized Carbon Dioxide Corrosion Propagation Using the Artificial Pit TechniqueCorrosion, 2010
- Pit growth and stifling on carbon steel in CO2-containing media in the presence of HAcElectrochimica Acta, 2009
- The effect of acetic acid on the pit propagation in CO2 corrosion of carbon steelElectrochemistry Communications, 2008
- Role of Conductive Corrosion Products in the Protectiveness of Corrosion LayersCorrosion, 1998
- Role of sulfate‐reducing bacteria in corrosion of mild steel: A reviewBiofouling, 1995