Traditional electrical distribution networks are designed with the assumption of a unidirectional power flow, from a higher voltage level network to a lower voltage level network. When distributed generators (DG) are connected to the electrical distribution network, it becomes bidirectionally powered, and the aforementioned assumption no longer holds. DGs significantly influence, among other things, voltage conditions, power flows, and fault currents. The effects of DG on the network can be positive or negative, depending on the type, power, connection point in the network, and the production-consumption ratio at a given location. The paper analyzes the case when DG production exceeds the required consumption in the electrical distribution network, leading to power being fed back into the higher voltage level network, i.e., reversed power flow. A step-by-step calculation example is provided for a MV-feeder where a DG is connected (voltage value at the supply bus and at the DG connection point for a given generated power value), along with a review of foreign experiences on the subject.