Embedded 3D Superionic Network Enables Pressure-Free Solid-State Sodium Batteries with Ultrafast Na + Diffusivity over a Wide Temperature Range
- 5 June 2026
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (23) , 16955-16964
Abstract
Rechargeable solid-state sodium-metal batteries (SSSMBs) are promising for next-generation energy storage, yet their performance severely deteriorates at ultralow temperatures due to interfacial degradation and sluggish bulk Na+ transport. The core issue lies in the low Na+ diffusivity within the anode, which induces interfacial void formation and nonuniform Na plating, triggering dendrite growth and rapid capacity fading. To fundamentally address this challenge, we designed an innovative composite anode by constructing an in situ 3D continuous superionic Na3P network within the sodium anode. The engineered 3D superionic network can facilitate uniform Na+ stripping/plating along the ion-conducting backbone, which effectively stabilizes the solid-state interface against cyclic degradation and dramatically enhances the Na+ diffusivity to 8 × 10–7 cm2 s–1. Consequently, symmetric solid-state cells achieve an areal capacity of 14 mAh cm–2 without stacking pressure; fascinatingly, full solid-state cells with this composite anode also demonstrate cyclic stability across a wide temperature range (−25 to 60 °C) and sustain over 540 cycles under a mass loading of 10 mg cm–2. This work highlights the superionic network integration as a practical strategy toward high-performance and extreme-temperature SSSMBs without stacking pressure, emphasizing the critical role of high atomic diffusivity in enabling durable, pressure-free solid-state batteries.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (2023CDJYXTD-002)
- National Natural Science Foundation of China (22179014)
- Guangdong Major Project of Basic Research (2023B0303000002)
This publication has 38 references indexed in Scilit:
- In Situ Construction of a 3D Superionic Skeleton in Sodium Anode for Solid‐State Sodium Batteries with a 15 000‐Cycle Lifespan at 3CAdvanced Materials, 2025
- Evaluating Pressure‐dependent Discharge Behavior of Foil Versus In situ Plated Lithium Metal Anodes in Solid‐State BatteriesAdvanced Energy Materials, 2024
- Enabling Uniform and Accurate Control of Cycling Pressure for All‐Solid‐State BatteriesAdvanced Energy Materials, 2024
- SnF2‐Induced Multifunctional Interface‐Stabilized Li5.5PS4.5Cl1.5‐Based All‐Solid‐State Lithium Metal BatteriesAdvanced Functional Materials, 2024
- Piezoelectric Interlayer Enabling a Rechargeable Quasisolid‐State Sodium Battery at 0 °CAdvanced Materials, 2023
- Evaluating the Use of Critical Current Density Tests of Symmetric Lithium Transference Cells with Solid ElectrolytesAdvanced Energy Materials, 2023
- Rechargeable Solid‐State Na‐Metal Battery Operating at −20 °CAdvanced Science, 2023
- Rechargeable Sodium Solid‐State Battery Enabled by In Situ Formed Na–K InterphaseAdvanced Energy Materials, 2023
- A Robust Solid–Solid Interface Using Sodium–Tin Alloy Modified Metallic Sodium Anode Paving Way for All‐Solid‐State BatteryAdvanced Energy Materials, 2021
- Diffusion Limitation of Lithium Metal and Li–Mg Alloy Anodes on LLZO Type Solid Electrolytes as a Function of Temperature and PressureAdvanced Energy Materials, 2019