RWRonghua Wang

Ronghua Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ronghua Wang has a total of 126 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Molecular-Level Cleavage and Kinetics Optimization in PVDF Electrolytes for Anode-Lean Ultrastable Solid-State Sodium Batteries

    by Chen Li, Yongbiao Mu, Tongtong Deng, Jinlong Hu, Mingliu Kuang, Kuiyou Wang, Yangyang Wang, Qizheng Zheng, Ronghua Wang, Chaohe Xu

    Polymer-based solid-state electrolytes are promising for safe and high-energy batteries but are fundamentally constrained by low ionic conductivity and unstable electrode interfaces. Here, we propose a molecular-level design using Na3P as a dual-function nanofiller in poly(vinylidene fluoride) (PVDF) electrolytes. The nucleophilic P3– selectively cleaves C–F bonds, reducing polymer crystallinity and releasing F– species, while Na3P simultaneously serves as a built-in fast-ion conductor. Theoretical simulations reveal that Na3P remodels the solvation structure, lowers the desolvation barrier from 9.96 to 2.84 eV, facilitates salt dissociation and reduces F– migration barrier from 4.23 to 3.0 eV, collectively promoting Na+ mobility and raising bulk conductivity to 6.93 × 10–4 S cm–1. The released F– promotes in situ formation of a dense, NaF-rich solid-electrolyte interphase, enabling homogeneous Na plating. Consequently, an anode-lean solid-state sodium battery exhibits exceptional stability, with only 0.002% capacity fade per cycle over 1000 cycles at 5C and >5700 cycles at 10C. A high-loading pouch cell (12 mg cm–2) also maintains stable performance for more than 100 cycles, underscoring the practical potential of this kinetics-optimized electrolyte system for high-energy-density solid-state batteries.

  • Open Access

    Vertically Aligned MoS 2 /MXene Heterojunction as a Bifunctional Separator Coating for Suppressing Shuttle Effect and Enhancing Li + Transport in Li–S Batteries

    by Tao Wu, Yunxia Liu, Jie Chang, Ronghua Wang, Chaohe Xu

    Lithium–sulfur batteries are considered one of the most promising next‐generation energy storage systems owing to their high theoretical energy density and natural abundance of sulfur. However, their practical application is severely hampered by the polysulfide shuttle effect and sluggish conversion kinetics. Herein, a two‐dimensional MoS 2 /MXene heterojunction composite (MMS) is rationally designed via one‐step hydrothermal growth of vertically aligned MoS 2 nanoflowers on conductive Ti 3 C 2 T x MXene substrates. This unique architecture integrates the high conductivity of MXene with abundant catalytic edge sites of MoS 2 , forming a tightly coupled heterointerface with 1T/2H mixed‐phase MoS 2 that synergistically enables physical confinement, chemical adsorption, and electrocatalytic conversion of polysulfides. When employed as a functional coating on polypropylene separators, MMS@PP exhibits enhanced electrolyte wettability, high ionic conductivity (1.476 mS cm −1 ), and a lithium‐ion transference number of 0.49. Consequently, Li–S batteries incorporating MMS@PP deliver a high specific capacity of 1294.1 mAh g −1 at 0.1 C with low polarization (161 mV), excellent rate capability (5 C), and outstanding cycling stability with 89.1% capacity retention after 100 cycles at 0.2 C. This work provides a rational heterojunction design strategy for developing multifunctional separators toward high‐performance Li–S batteries.

  • Embedded 3D Superionic Network Enables Pressure-Free Solid-State Sodium Batteries with Ultrafast Na + Diffusivity over a Wide Temperature Range

    by Chen Li, Yongbiao Mu, Tongtong Deng, Miaomiao Guo, Yating Wang, Guanjie Lu, Jinlong Hu, Ronghua Wang, Lin Zeng, Chaohe Xu

    Rechargeable solid-state sodium-metal batteries (SSSMBs) are promising for next-generation energy storage, yet their performance severely deteriorates at ultralow temperatures due to interfacial degradation and sluggish bulk Na+ transport. The core issue lies in the low Na+ diffusivity within the anode, which induces interfacial void formation and nonuniform Na plating, triggering dendrite growth and rapid capacity fading. To fundamentally address this challenge, we designed an innovative composite anode by constructing an in situ 3D continuous superionic Na3P network within the sodium anode. The engineered 3D superionic network can facilitate uniform Na+ stripping/plating along the ion-conducting backbone, which effectively stabilizes the solid-state interface against cyclic degradation and dramatically enhances the Na+ diffusivity to 8 × 10–7 cm2 s–1. Consequently, symmetric solid-state cells achieve an areal capacity of 14 mAh cm–2 without stacking pressure; fascinatingly, full solid-state cells with this composite anode also demonstrate cyclic stability across a wide temperature range (−25 to 60 °C) and sustain over 540 cycles under a mass loading of 10 mg cm–2. This work highlights the superionic network integration as a practical strategy toward high-performance and extreme-temperature SSSMBs without stacking pressure, emphasizing the critical role of high atomic diffusivity in enabling durable, pressure-free solid-state batteries.


  • Magnesiophilic Black Phosphorus Interphase Enabling Planar Electrodeposition and High-Rate Long-Cycling Magnesium Metal Anodes

    by Qiannan Zhao, Kaiqi Zhao, Boo-Jae Jang, Yuhang Chen, Baihua Qu, Yongheng Fang, Ronghua Wang, Zhongting Wang, Jingfeng Wang, Chaohe Xu, et al.

    Magnesium metal anode is considered a promising alternative to lithium metal anode due to its high volumetric/gravimetric energy density, natural abundance, and high safety property. However, its practical application remains limited by detrimental three-dimensional (3D) deposition behavior, leading to shallow deposition/stripping capability and rapid short-circuit with low current density and restricted deposition capacity tolerance. In this study, a magnesiophilic black phosphorus interface is introduced onto a magnesium metal anode to homogenize the spatial distributions of ion flux and electric field near the deposition sites. Simultaneously, the intermediate phase and black phosphorus matrix effectively balance the charge transfer and ion diffusion during the electrodeposition process, enabling flat magnesium deposition rather than detrimental 3D hemispherical growth. As a result, the black phosphorus-modified magnesium anode demonstrated an extended stable cycle life of 1700 h at 2 mA cm-2 and 2 mAh cm-2 and increased specific areal current/capacity tolerance to 60 mA cm-2/60 mAh cm-2. Magnesium full cells assembled with the black phosphorus-modified magnesium anode and Mo6S8 cathode exhibited stable cycling performance with a low-capacity decay rate of 0.03% per cycle over 800 cycles at 5 C.


  • Accelerating interfacial desolvation kinetics using NaF-rich composite sodium for high-performance all-climate sodium–metal batteries

    by Tongtong Deng, Chen Li, Guanjie Lu, Zongyang Li, Chaohe Xu, Ronghua Wang

    The NaF-rich composite sodium can endow the anode's interface a good thermal stability at 60 °C and accelerate the desolvation of Na + -solvent clusters at −40 °C, finally exhibiting a stable all-climate performance in ester-based electrolyte.


  • Open Access

    High-capacity, fast-charging and long-life magnesium/black phosphorous composite negative electrode for non-aqueous magnesium battery

    by Qiannan Zhao, Kaiqi Zhao, Gao-Feng Han, Ming Huang, Ronghua Wang, Zhiqiao Wang, Wang Zhou, Yue Ma, Jilei Liu, Zhongting Wang, et al.

    Secondary non-aqueous magnesium-based batteries are a promising candidate for post-lithium-ion battery technologies. However, the uneven Mg plating behavior at the negative electrode leads to high overpotential and short cycle life. Here, to circumvent these issues, we report the preparation of a magnesium/black phosphorus (Mg@BP) composite and its use as a negative electrode for non-aqueous magnesium-based batteries. Via in situ and ex situ physicochemical measurements, we demonstrate that Mg ions are initially intercalated in black phosphorus two-dimensional structures, forming chemically stable MgxP intermediates. After the formation of the intermediates, Mg electrodeposition reaction became the predominant. When tested in the asymmetric coin cell configuration, the Mg@BP composite electrode allowed stable stripping/plating performances for 1600 h (800 cycles), a cumulative capacity of 3200 mAh cm−2, and a Coulombic efficiency of 99.98%. Assembly and testing of the Mg@BP | |nano-CuS coin cell enabled a discharge capacity of 398 mAh g−1 and an average cell discharge potential of about 1.15 V at a specific current of 560 mA g−1 with a low decay rate of 0.016% per cycle for 225 cycles at 25 °C.


  • Open Access

    Suppression of Secondary Electron Emission by Vertical Graphene Coating on Ni Microcavity Substrate

    by Xiaoning Zhang, Bin Tang, Jialong He, Hui Zhao, Ronghua Wang, Hao Gui, Xinlu Li, Kefu Liu, Jinshui Shi, Guomei Chang

    Suppression of secondary electron emission (SEE) from metal surfaces is crucial for enhancing the performance of particle accelerators, spacecraft, and vacuum electronic devices. Earlier research has demonstrated that either etching the metal surface to create undulating structures or coating it with materials having low secondary electron yield (SEY) can markedly decrease SEE. However, the effectiveness of growing vertical graphene (VG) on laser-etched metal surfaces in suppressing SEE remains uncertain. This study examined the collective impact of these methods by applying nanoscale arrays of VG coating using plasma-enhanced chemical vapor deposition on Ni substrates, along with the formation of micrometer-sized microcavity array through laser etching. Comparative tests conducted revealed that the SEY of the samples subjected to VG coating on a microcavity array was lower compared to samples with either only a microcavity array or VG coating alone. Additionally, the crystallinity of VG grown on substrates of varying shapes exhibited variations. This study presents a new method for investigating the suppression of SEE on metal surfaces, contributing to the existing body of knowledge in this field.

  • Low secondary electron emission characteristics of carbon nano-onion coating via plasma enhanced chemical vapor deposition

    by Xiaoning Zhang, Hao Gui, Jialong He, Ronghua Wang, Hui Zhao, Wei Zhao, Bin Tang, Jie Yang, Feixiang Liu, Xinlu Li, et al.