Improved electro-migration resistance in nano Ag modified Sn-58Bi solder joints under current stressing
Authors:
- 1 June 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 374-379
Abstract
In this study, doped-Sn58Bi solders were prepared by mechanically dispersing Ag nano particles additive in Sn-58Bi solders. The interfacial morphologies of the plain solder and doped Sn-58Bi solders under a direct current (DC) of 2.5 A at 75°C temperature with Cu pads and Au/Ni/Cu on daisy chain type ball grid array (BGA) substrates were characterized. Unlike the plain solder, there is no obvious accumulation of Bi-rich IMC or Sn rich IMC extrusions on the anode side or cathode side, respectively. The Cu-Sn IMCs on the Cu substrate and Ni-Sn IMCs on the Au/Ni substrates were formed near the cathode interface after the first-reflow induced current crowding near the junction. Cluster like Ag-Sn IMCs in the solder matrix prevented the migration of atoms under current stressing and improved the electro-migration resistance. In addition, fracture occurs at the IMC interfacial region during shear testing with a ductile fracture mode. In the solder ball region β-Sn matrix of Sn-58Bi solder joints with a refined microstructure and inter-metallic compound particles Ag were observed, which resulted in an increase in the shear strength, due to a second phase dispersion strengthening mechanism.Keywords
This publication has 17 references indexed in Scilit:
- Effect of Zn doping on SnAg solder microstructure and electromigration stabilityJournal of Applied Physics, 2009
- Interfacial microstructure and shear strength of Ag nano particle doped Sn–9Zn solder in ball grid array packagesMicroelectronics Reliability, 2009
- Effects of silver doping on electromigration of eutectic SnBi solderJournal of Alloys and Compounds, 2008
- Abnormal polarity effect of electromigration on intermetallic compound formation in Sn–9Zn solder interconnectScripta Materialia, 2007
- Effects of Copper Doping on Microstructural Evolution in Eutectic SnBi Solder Stripes under Annealing and Current StressingJournal of Electronic Materials, 2007
- Electromigration-induced failure in flip-chip solder jointsJournal of Electronic Materials, 2005
- Mechanism of electromigration-induced failure in the 97Pb–3Sn and 37Pb–63Sn composite solder jointsJournal of Applied Physics, 2003
- Recent advances on electromigration in very-large-scale-integration of interconnectsJournal of Applied Physics, 2003
- Six cases of reliability study of Pb-free solder joints in electronic packaging technologyMaterials Science and Engineering: R: Reports, 2002
- Microstructure evolution in Sn–Bi and Sn–Bi–Cu solder joints under thermal agingMaterials Chemistry and Physics, 2001