Corrosion Behavior of Alkyd-Resin-Coated Carbon Steel under Cathodic Polarization in Both Static and Flowing Seawater
Open Access
Abstract
The effect of cathodic polarization on the corrosion behavior of alkyd-resin-coated carbon steel with an artificial coating defect was researched using a wire beam electrode (WBE) and electrochemical impedance spectroscopy (EIS) in both static and flowing simulated solutions. The microscopic morphology and chemical structure of the organic coating were characterized by scanning electron microscopy (SEM) and infrared spectroscopy (FT-IR) to reveal the degradation mechanisms of organic coatings under different polarization potentials. The study found that the failure process of the alkyd coating could be accelerated by cathodic polarization. After 312 h of immersion, the impedance under −1100 mV was one order of magnitude lower than that under the open-circuit potential (OCP). The coating delamination became serious with the negative shifting of polarization potential, and the delamination area ratio under −1100 mV in both static and flowing seawater rose to 23% and 14%, respectively. Interestingly, the flowing condition of the immersion solution that combined with cathodic polarization exhibited a synergistic effect, which could accelerate (in the earlier stage) and then alleviate the delamination of the coating. Furthermore, the results showed that both the diffusion of the corrosion particles and the anodic dissolution reaction of the metal could be significantly affected by cathodic polarization and the flowing condition of the solution, which provides a possible approach to gain insight into the delamination of organic coating.Keywords
Funding Information
- National Natural Science Foundation of China (51971192, 80904010503, ZR2020ME132, ZR2022QE155)
- Equipment Pre-research Field Fund (51971192, 80904010503, ZR2020ME132, ZR2022QE155)
- Natural Science Foundation General Project of Shandong Provincial (51971192, 80904010503, ZR2020ME132, ZR2022QE155)
This publication has 47 references indexed in Scilit:
- Degradation of rubber to metals bonds during its cathodic delamination, validation of an artificial ageing testProgress in Organic Coatings, 2011
- Cathodic disbonding of an unpigmented epoxy coating on mild steel under semi- and full-immersion conditionsCorrosion Science, 2011
- Studies of the impedance models and water transport behaviors of cathodically polarized coatingElectrochimica Acta, 2011
- Cathodic disbondment of epoxy coating with zinc aluminum polyphosphate as a modified zinc phosphate anticorrosion pigmentProgress in Organic Coatings, 2010
- Localized EIS characterization of corrosion of steel at coating defect under cathodic protectionElectrochimica Acta, 2008
- Studies of water transport behavior and impedance models of epoxy-coated metals in NaCl solution by EISProgress in Organic Coatings, 2004
- FTIR studies of the curing reactions of palm oil alkyd–melamine enamelsJournal of Applied Polymer Science, 2001
- Factors Influencing the Rate of Cathodic Disbonding of CoatingsCorrosion, 1994
- The application of X-ray photoelectron spectroscopy to the study of polymer-to-metal adhesionJournal of Materials Science, 1984
- Technical Note: The Mechanism of Cathodic Disbondment of Protective Organic Coatings—Aqueous Displacement at Elevated pHCorrosion, 1984