Millimeter-Wave Waveguide-to-Microstrip Transition With a Built-In DC/IF Return Path
- 10 December 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (2) , 1295-1304
Abstract
In this article, a novel waveguide-to-microstrip transition with a built-in dc/IF return path is proposed, in which a traditional E-plane probe is directly connected to the backshort by a thin metal wire along the axis of the waveguide. The proposed waveguide-to-microstrip transition implements an additional dc/IF return path while realizing mode conversion. Moreover, the presence of the dc/IF return path has little influence on the performance of the original E-plane probe. The operating principle is analyzed by theoretical analysis and full-wave simulation, and the design procedure of the transition is also presented. To implement the proposed dc/IF return path on different substrates, two approaches, including direct integration with planar circuits or with wire bonding technology, are developed. Furthermore, two back-to-back transition prototypes working in the millimeter and submillimeter bands were designed and characterized. The measured results are in excellent agreement with the simulations. Finally, as an application example, a 70-/140-GHz unbalanced frequency doubler adopting this structure for both dc biasing and dc grounding was designed and fabricated. Measured results show that the conversion loss of the fabricated doubler is less than 13 dB in the range from 125 to 145 GHz, and the minimum conversion loss is 11 dB at 140 GHz with 100-mW input power.Keywords
Funding Information
- National Natural Science Foundation of China (61871072)
This publication has 23 references indexed in Scilit:
- THz Diode Technology: Status, Prospects, and ApplicationsProceedings of the IEEE, 2017
- Inline waveguide to suspended stripline transition with DC/IF return pathMicrowave and Optical Technology Letters, 2017
- A 220 GHz subharmonic mixer based on schottky diodes with an accurate terahertz diode modelMicrowave and Optical Technology Letters, 2016
- Millimeter Wave E-Plane Transition From Waveguide to Microstrip Line With Large Substrate Size Related to MMIC IntegrationIEEE Microwave and Wireless Components Letters, 2016
- 160 GHz Balanced Frequency Quadruplers Based on Quasi-Vertical Schottky Varactors Integrated on Micromachined SiliconIEEE Transactions on Terahertz Science and Technology, 2014
- Mixer-Based Characterization of Millimeter-Wave and Terahertz Single-Anode and Antiparallel Schottky DiodesIEEE Transactions on Terahertz Science and Technology, 2014
- Design of a W-band Frequency Tripler for Broadband Operation Based on a Modified Equivalent Circuit Model of GaAs Schottky Varistor DiodeJournal of Infrared, Millimeter, and Terahertz Waves, 2012
- Waveguide-to-microstrip transitions for millimeter-wave applications2003
- A novel waveguide-to-microstrip transition for millimeter-wave module applicationsIEEE Transactions on Microwave Theory and Techniques, 1999
- A waveguide-to-microstrip transition with a DC-IF return path and an offset probeIEEE Transactions on Microwave Theory and Techniques, 1997