Damage behavior of tungsten fiber‐reinforced copper matrix composite after high‐speed impact
Authors:
- 31 May 2014
- journal article
- Published by Wiley in Rare Metals
- Vol. 33 (3) , 330-336
Abstract
W f /Cu 82 Al 10 Fe 4 Ni 4 composite was fabricated by means of infiltration casting. By the microstructure observation of the composite with the aid of scanning electron microscopy (SEM) and transmission electron microscopy (TEM), it can be found that there are (Fe, Ni), AlFe, Al 3 Ni, and Cu 3 Al precipitated phases existing in the matrix alloy. By two‐stage light gas gun, W f /Cu 82 Al 10 Fe 4 Ni 4 composite hypervelocity projectile into concrete target test with the speed of 2.2 km·s −1 is finished. By microstructure observation, it can be found that the failure mode of W f /Cu 82 Al 10 Fe 4 Ni 4 composite projectile during penetration is the rapid peeling of tungsten fibers from the projectile, which makes the projectile display good self‐sharpening property. Meanwhile, it can be found that microstructure morphology change of W f /Cu 82 Al 10 Fe 4 Ni 4 composite occurs after hypervelocity impact. The density of dislocations around the large‐dimensional (Fe, Ni), AlFe, Al 3 Ni, and Cu 3 Al precipitated phases in the matrix alloy rises sharply. At the same time, there are large‐dimensional deformed twins existing in local regions and stacking faults existing inside the twins.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (DL12BB04)
- National Natural Science Foundation of China (31200434)
- National Natural Science Foundation of China (31370566)
This publication has 24 references indexed in Scilit:
- Microstructure and texture evolution during the drawing of tungsten wiresEngineering Fracture Mechanics, 2009
- Interfacial optimization of tungsten fibre-reinforced copper for high-temperature heat sink material for fusion applicationJournal of Nuclear Materials, 2009
- Microstructural characteristics of post-shear localization in cold-rolled 316L stainless steelActa Materialia, 2007
- Wire drawing failures and tungsten fracture phenomenaInternational Journal of Refractory Metals and Hard Materials, 2006
- Synthesis and consolidation of nanostructured W–10–40wt.% Cu powdersMaterials Science and Engineering: A, 2005
- Process optimisation for a squeeze cast magnesium alloy metal matrix compositeJournal of Materials Processing Technology, 2005
- Microstructural evolution in adiabatic shear localization in stainless steelActa Materialia, 2003
- Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetratorsMaterials Science and Engineering: A, 1999
- Mechanical properties of tungsten and steel fiber reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 metallic glass matrix compositesActa Materialia, 1998
- Shock-induced deformation twinning in tantalumActa Materialia, 1997