Highly integrable planar-structured printed circularly polarized antenna for emerging wideband internet of things applications in the millimeter-wave band
Authors:
Open Access
- 2 May 2024
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-14
Abstract
This paper proposes a numerically and experimentally validated printed wideband antenna with a planar geometry for Internet of Things (IoT) applications. This design tackles the challenges associated with deploying IoT sensors in remote areas or across extensive geographical regions. The proposed design exploits a coplanar-waveguide-fed modified microstrip line monopole for excitation of circularly polarized waves radiating in the broadside direction. The primary design is based on perturbations of the microstrip line protracted from a grounded coplanar waveguide. The capacitively coupled short rectangular stubs are periodically inserted alternately and excited asymmetrically on each side of the microstrip line parallel to the direction of the electric field vector. The sequential phase excitation of the periodic stubs generates a rectangular-cascaded electric field, which suppresses the stop band at the open end. As a result, the antenna radiates in the broadside direction. The impedance bandwidth of the antenna exceeds 8 GHz in the 28 GHz mm-wave band, i.e., it ranged from 25 to 33.5 GHz. Additionally, an axial ratio below 3 dB is achieved within the operating band from 26 to 33.5 GHz with the alterations of the surface current using straightforward topological adjustments of the physical parameters. The average in-band realized gain of the antenna is 10 dBic when measured in the broadside direction. These results indicate that the proposed design has the potential to improve the connectivity between IoT devices and the constantly varying orientation of satellites by mitigating the polarization mismatch.Keywords
Funding Information
- Icelandic Centre for Research (217771)
This publication has 36 references indexed in Scilit:
- Broadband CPW-fed circularly polarized antenna for IoT-based navigation systemInternational Journal of Microwave and Wireless Technologies, 2019
- 28 GHz Switched-Beam Antenna Based on S-PIN Diodes for 5G Mobile CommunicationsIEEE Antennas and Wireless Propagation Letters, 2017
- A Compact 38 GHz Multibeam Antenna Array With Multifolded Butler Matrix for 5G ApplicationsIEEE Antennas and Wireless Propagation Letters, 2017
- Circularly polarized omnidirectional microstrip antenna array2017
- Wideband Circularly Polarized Substrate Integrated Waveguide Endfire Antenna System With High GainIEEE Antennas and Wireless Propagation Letters, 2017
- Dual Circularly Polarized Series-Fed Microstrip Patch Array With Coplanar Proximity CouplingIEEE Antennas and Wireless Propagation Letters, 2017
- High-Gain Low-Profile Circularly Polarized Slotted SIW Cavity Antenna for MMW ApplicationsIEEE Antennas and Wireless Propagation Letters, 2016
- LHCP and RHCP Substrate Integrated Waveguide Antenna Arrays for Millimeter-Wave ApplicationsIEEE Antennas and Wireless Propagation Letters, 2016
- Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!IEEE Access, 2013
- A Circularly Polarized Broadside Radiating “Herringbone” Array Design With the Leaky-Wave ApproachIEEE Antennas and Wireless Propagation Letters, 2010