UUUbaid Ullah

Ubaid Ullah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ubaid Ullah has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Meta-lens-based circularly polarized fixed-beam antenna for high-gain wideband millimeter-wave applications

    by Ubaid Ullah, Slawomir Koziel, Anna Pietrenko-Dabrowsks

    A planar metamaterial lens-based single-element circularly polarized (CP) antenna for millimeter wave (mm-wave) band applications is presented. The proposed antenna consists of a modified patch excited by a single-point-fed coaxial probe and two displaced layers of a novel meta-lens design. The modified structure allows for the simultaneous excitation of orthogonal components with equal magnitudes. To realize the gain enhancement of the proposed design, a novel meta-lens is designed based on meta-atoms of subwavelength size arranged in a disconnected cross-shape repeated pattern. To effectively focus the outgoing CP wave radiated by the antenna, the focal distance is meticulously optimized. Two layers of the same lens are used to enhance the antenna gain. Following a rigorous numerical analysis and optimization, the proposed design is fabricated and experimentally validated. The comparison of the results with the lens and without the lens illustrates that a 4 dB gain improvement is attained with the compact lens configuration. Furthermore, the antenna features a wide impedance bandwidth (S11) from 24 GHz to 31 GHz and the axial ratio (AR) below 3 dB within the same operating band. The proposed design offers multiple advantages, including a simple geometrical configuration, light in weight, and ease of integration due to the planar lens structure. The proposed antenna is suitable for multiple modern communication systems, including short-range radar systems and other line-of-sight mm-wave applications requiring fixed-beam and high data rates.

  • Open Access

    Characteristics mode analysis and excitation of orthogonal modes on a single substrate for wideband IoT applications in the millimeter wave band

    by Ubaid Ullah, Slawomir Koziel, Anna Pietrenko-Dabrowsks

    This paper presents the design of a circularly polarized millimeter-wave (mm-wave) metasurface (MTS) antenna. The Characteristics Modes Analysis (CMA) is employed to examine various modes within the unit-cell design of the proposed metasurface. Based on a thorough analysis, two orthogonal TM modes with a broadside radiation pattern were identified. These modes were then simultaneously excited on a single substrate using simple coplanar waveguide (CPW) magnetic dipoles resulting in circular polarization (CP). Further, it has been demonstrated that the sense of polarization can be easily reconfigured for realizing multiple-input-multiple-output (MIMO) antenna with polarization diversity. Both the single MTS antenna and the MIMO design are characterized numerically and experimentally. The simulated and measured results show that impedance bandwidth (S11 ≤ − 10 dB) of the antenna is from 25 to 30.8 GHz. The axial ratio (AR) below 3 dB is from 26 to 31 GHz with a stable broadside radiation pattern. The proposed design features a low profile and simple geometry which is extremely appropriate for applications in the mm-wave band.


  • Open Access

    Power Transmission for Millimeter-Wave Indoor/Outdoor Wearable IoT Devices Using Grounded Coplanar Waveguide-Fed On-Body Antenna

    by Fuad Erman, Slawomir Koziel, Alhareth Zyoud, Leifur Leifsson, Ubaid Ullah, Shaker Alkaraki

    This paper presents for the first-time evaluation of wireless power transmission (WPT) for sustainable low-powered Internet of Things (IoT) devices in realistic indoor/outdoor scenarios using empirical propagation models at 28 GHz. The used empirical propagation models have shown that using an on-body 9×9 mm-wave rectenna array based on a proposed mm-wave antenna is able to charge IoT devices at a distance of 57 m for line-of-sight (LOS) indoor temporal environment, and at a distance of 10 m for LOS outdoor tropical propagation model using a base station with 53 dBm transmission power. Furthermore, the mm-wave on-body 9×9 rectenna array occupies an area equal to that of a single UHF rectenna, while collecting 17-fold more power. In addition, the article discusses the design and experimental results of a single-element on-body mm-wave antenna used to design the 9×9 rectenna array. The proposed mm-wave antenna is a single-layer low-profile structure. Furthermore, the antenna has a stable gain of over 9.5 dBi and a wide beamwidth. The on-body antenna structure consists of rectangular multi-slot patch fed by a 50 Ω grounded coplanar waveguide (GCPW) line. Employing the multi-slot configuration results in a wearable antenna’s impedance bandwidth of 3.73 GHz. The peak measured gain of the antenna is 10.5 for chest/arm-mounted case in the operating 28 GHz N257 5G band. The antenna’s radiation pattern forms a wide off-body forward direction beam. A prototype of the proposed antenna is fabricated and validated experimentally for both cases on a human volunteer arm/chest and in the free space. The size of the proposed structure is small and can collect power with high efficiency due to the short wavelength of millimeter wave (mm-wave) in contrast to UHF antennas.


  • Open Access

    Highly integrable planar-structured printed circularly polarized antenna for emerging wideband internet of things applications in the millimeter-wave band

    by Ubaid Ullah, Slawomir Koziel, Anna Pietrenko-Dabrowska

    This paper proposes a numerically and experimentally validated printed wideband antenna with a planar geometry for Internet of Things (IoT) applications. This design tackles the challenges associated with deploying IoT sensors in remote areas or across extensive geographical regions. The proposed design exploits a coplanar-waveguide-fed modified microstrip line monopole for excitation of circularly polarized waves radiating in the broadside direction. The primary design is based on perturbations of the microstrip line protracted from a grounded coplanar waveguide. The capacitively coupled short rectangular stubs are periodically inserted alternately and excited asymmetrically on each side of the microstrip line parallel to the direction of the electric field vector. The sequential phase excitation of the periodic stubs generates a rectangular-cascaded electric field, which suppresses the stop band at the open end. As a result, the antenna radiates in the broadside direction. The impedance bandwidth of the antenna exceeds 8 GHz in the 28 GHz mm-wave band, i.e., it ranged from 25 to 33.5 GHz. Additionally, an axial ratio below 3 dB is achieved within the operating band from 26 to 33.5 GHz with the alterations of the surface current using straightforward topological adjustments of the physical parameters. The average in-band realized gain of the antenna is 10 dBic when measured in the broadside direction. These results indicate that the proposed design has the potential to improve the connectivity between IoT devices and the constantly varying orientation of satellites by mitigating the polarization mismatch.


  • Dual Electro-Optic Comb Generator by Heterodyning Two Combs for Extending the Optical Bandwidth

    by Rahat Ullah, Ubaid Ullah, Sibghat Ullah, Abdullah A. Al-Atawi, Hathal Salamah Alwageed, Ahmad Almadhor, Shuaidong Chen, Jianxin Ren

    A novel dual-electro-optic (DEO) comb generator is proposed by heterodyning the optical frequency combs (OFCs) to achieve a high bandwidth of ~2.74 THz with an efficient and cost-effective structure. This can attract the research community’s interest, particularly for the inherent support in optical communications due to its simplicity and high throughput. The OFC is generated by cascading a continuous wave (CW) laser and Mach Zehnder modulator (MZM) coupled to a second laser source that produces a broad spectrum of frequencies by the frequency heterodyning after passing it through a second MZM. This is the highest number of comb lines produced so far in cascaded configurations of the electro-optic modulators. The frequency difference between the two lasers is carefully selected, equal to 1.38 THz, which combinedly produces around 137 well-flattened OFC lines with 20 GHz frequency spacing and more than 40 dBm tone to noise ratio and an amplitude difference of 0 to 6 dB. The bandwidth of the generated flattened comb source is approximately 2.74 THz, which covers over half of the optical C-band.


  • Tolerance-Aware Optimization of Microwave Circuits by Means of Principal Directions and Domain-Restricted Metamodels

    by Slawomir Koziel, Anna Pietrenko-Dabrowska, Ubaid Ullah

    Practical microwave design is most often carried out in the nominal sense. Yet, in some cases, performance degradation due to uncertainties may lead to the system failing to meet the prescribed specifications. Reliable uncertainty quantification (UQ) is, therefore, important yet intricate from numerical standpoint, especially when the circuit at hand is to be evaluated using electromagnetic (EM) simulation tools. Tolerance-aware design (e.g., yield improvement) is even more challenging. This article introduces a methodology for low-cost surrogate-based yield optimization of passive microwave components. The novelty of the proposed approach, and, at the same time, its major acceleration factor is to span the metamodel domain with the selected principal vectors, characterized by significant response variability within operating frequency bands of the component under design. This results in a volumewise constriction of the domain (thereby lower cost of the surrogate model setup) without restricting its size along the relevant directions of the parameter space. Consequently, our technique is a one-shot approach for yield optimization that does not require neither domain relocation nor surrogate reconstruction. Our methodology is demonstrated using two microstrip components and favorably compared to benchmark metamodeling techniques in terms of the computational cost of the yield maximization procedure. The average cost is only 130 EM simulations of the respective circuit, versus the average of 800 and over 360 analyses for the benchmark procedures. At the same time, its reliability is verified by means of EM-based Monte Carlo simulation.


  • Design and Characterization of a Planar Structure Wideband Millimeter-Wave Antenna With Wide Beamwidth for Wearable Off-Body Communication Applications

    by Ubaid Ullah, Slawomir Koziel, Anna Pietrenko-Dabrowska

    This letter presents the design of a planar single-layer wideband antenna featuring wide beamwidth has well as high and stable in-band gain. The proposed antenna is a planar monopole fed by a bottom-grounded coplanar waveguide to realize wide beamwidth in both the xz - and yz -planes. Simultaneous optimization of all adjustable antenna parameters, carried out at the full-wave electromagnetic simulation level. The constructive interference of the radiated fields resulting in impedance bandwidth of more than 2 GHz, from 27 to 29 GHz. Along with a stable realized gain (>11 dBi) in the operating frequency band. The proposed antenna maintains a directional radiation pattern in the broadside direction. Merging the radiated modes of the slots and the parasitic patch elements also extends the antenna beamwidth to roughly ±35° with respect to the broadside direction. Following a detailed theoretical analysis, the antenna is validated numerically and experimentally, both in the free space and on a human volunteer chest and arm.


  • Enabling MIMO Antenna Miniaturization and Wide Circular Polarization Coverage by Amalgamation of a Dielectric Strip Between Meandered Traces and Slotted Ground

    by Shahanawaz Kamal, Mohd Fadzil Ain, Ubaid Ullah, Mohamad Faiz Mohamed Omar

    This letter presents a dual-element multiple-input–multiple-output antenna for applications in the very high frequency band. A compact geometry of microstrip line-fed radiators engaging 0.04 $ \times $ 0.04 ${{\boldsymbol{\lambda }}}^2$ footprint at 150 MHz was fabricated on an FR-4 substrate and tested in the anechoic chamber. Good circularly polarized radiation patterns were generated by employing two corner-fed meander lines and integrating slots at strategic locations of the ground. A dielectric strip was stacked above the substrate and between the two meandered elements to enable $ -$ 10 dB impedance bandwidth of 24%. In the operating frequency band from 133 to 169 MHz, the proposed antenna offered axial ratio of -25 dB, gain of $\sim $ 3 dBi, efficiency ( ${\boldsymbol{\eta }}$ ) of $\sim $ 80%, envelope correlation coefficient of $ < $ 0.5 and diversity gain of $\sim $ 10 dB.