Effect of Y addition on the structural transformation and thermal stability of Ti-22Al-25Nb alloy produced by mechanical alloying
- 1 July 2021
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 63 (7) , 599-605
Abstract
In this study, a Ti-22Al-25Nb alloy with nanocrystalline structure was produced by high energy mechanical alloying (HEMA) and 1 at.-% yttrium was added as a thermal stabilizer. The as-milled samples were annealed at various temperatures up to 900 °C in a protective gas atmosphere, and the samples were allowed to cool to room temperature in the furnace. The phase transformations and microstructural changes as a function of the annealing temperatures and alloy compositions were studied using room- and high-temperature X-ray diffraction (XRD), focused ion beam microscopy (FIB), and scanning electron microscopy (SEM). The mechanical properties of the samples were interpreted based on the hardness results and their correlation with the microstructures. The results showed that the as-milled nanocrystalline structure of Ti-22Al-25Nb alloy increased from 3.4 nm to 350 nm after annealing at 800 °C due to the high driving force induced by the large grain boundary area. Consequently, the as-milled hardness of the Ti-22Al-25Nb alloy dropped from 7.63 ± 0.18 GPa to 5.37 ± 0.28 GPa. The grain size stability of the Ti-22Al-25Nb alloy after annealing at elevated temperature was ensured through the addition of yttrium. Thus, the grain size remained at the level of 125 nm, and the hardness value was maintained at around 6.98 ± 0.43 GPa after annealing at 800 °C.Keywords
This publication has 55 references indexed in Scilit:
- Thermal stability and mechanical properties of nanocrystalline Fe–Ni–Zr alloys prepared by mechanical alloyingJournal of Materials Science, 2013
- Grain boundary relaxation strengthening of nanocrystalline Ni–W alloysJournal of Materials Research, 2012
- Influence of yttria additions on the oxidation behaviour of titanium prepared by powder metallurgyScripta Materialia, 2009
- Titanium Alloys for Aerospace ApplicationsAdvanced Engineering Materials, 2003
- Characterization of mechanically alloyed Ti–Al–Si powder blends and their subsequent thermal stabilityMaterials Science and Engineering: A, 2002
- High-temperature structural intermetallicsActa Materialia, 2000
- The Study of Structural Evolution and Thermal Stability of Ball-Milled Ti-Al and Ti-Al-Mn-Nb Nanocrystalline PowdersMaterials Science Forum, 1999
- Titanium alloys in total joint replacement—a materials science perspectiveBiomaterials, 1998
- Lightweight materials for aircraft applicationsMaterials Characterization, 1995
- Reprecipitation observed in Y2O3 dispersed titanium during heat treatment after cold rollingScripta Metallurgica, 1989