Additive Manufacturing Based Polymer Compounded Refractive Lenses for X-Ray Focusing at Synchrotron Light Sources
Open Access
Abstract
Additive manufacturing offers a promising route to low-cost, rapidly deployable X-ray focusing optics with geometries that are difficult to realize by conventional machining. Here, we report polymer compound refractive lenses (CRLs) for hard X-ray focusing fabricated by projection micro-stereolithography (PµSL, DLP-based) and by two-photon polymerization (2PP). Two-dimensional bi-parabolic CRL elements were produced in multiple photopolymer resins (HTL, Tough, ST1400 for PμSL; IP-S for 2PP) and evaluated by at-wavelength metrology at the Shanghai Synchrotron Radiation Facility. The single-lens residual phase errors (RMS) less than 0.1 were measured for PµSL-fabricated HTL, and Toughlenses, respectively, while 2PP-fabricated IP-S lenses achieved 0.008 . And the analysis indicates that PµSL lenses are primarily limited by systematic mid-order aberrations, whereas 2PP substantially suppresses coma but shows residual spherical aberration attributable to process calibration and shrinkage. Leveraging the higher fidelity of 2PP, a 65-element parabolic CRL array (radius of curvature of 100 µm) was fabricated and demonstrated hard X-ray focusing at 15 keV with focal spot sizes of 6.4 ± 1 µm (H) and 6.8 ± 1 µm (V), and a flux gain of 220. The measured performance agrees with theoretical expectations when accounting for X-ray source properties, detector resolution and chromatic aberration. These results establish a practical pathway for additively manufactured polymer CRLs with DLP and 2PP techniques as compact, customization focusing optics for synchrotron beamlines.
Keywords
Funding Information
- National Natural Science Foundation of China (12305363)
- National Natural Science Foundation of China (12575346)
- Shanghai Rising-Star Program (23QA1406700)
- Science and Technology Commission of Shanghai Municipality (24JD1402200)
This publication has 18 references indexed in Scilit:
- Apochromatic X-ray focusingLight: Science & Applications, 2023
- Single-shot x-ray phase-contrast and dark-field imaging based on coded binary phase maskApplied Physics Letters, 2021
- Impact of beryllium microstructure on the imaging and optical properties of X-ray refractive lensesJournal of Synchrotron Radiation, 2020
- Multiscale metallic metamaterialsNature Materials, 2016
- Refractive Lenses for Microscopy and NanoanalysisSynchrotron Radiation News, 2016
- Refractive x-ray lensesJournal of Physics D: Applied Physics, 2005
- Projection micro-stereolithography using digital micro-mirror dynamic maskSensors and Actuators A: Physical, 2005
- Diffraction theory of imaging with X-ray compound refractive lensOptics Communications, 2003
- Imaging by parabolic refractive lenses in the hard X-ray rangeJournal of Synchrotron Radiation, 1999
- A compound refractive lens for focusing high-energy X-raysNature, 1996