Study of overflow effects on flow‐induced stress in injection molding
Authors:
- 10 November 2023
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (1) , 170-183
Abstract
Overflow is usually used to keep fluid continuously flowing to avoid the fluid from changing flow direction and subsequently inducing large stresses. To explore the mechanism of flow‐induced stress evolution, a flow model was established in terms of compressible, non‐isothermal, and viscoelastic flow. Based on the Leonov model and the mid‐plane approach, a pseudo‐Poisson type equation for pressure was derived to decouple the interdependence between velocity and pressure. To improve computational efficiency, a numerical approach involving double iterations was proposed to solve the flow problem. Two kinds of mold cavities, with and without overflow, were designed and manufactured. Molding experiments were conducted, and corresponding simulations based on the proposed model and algorithm were performed. The results show that the simulated contours of flow‐induced stress are in good agreement with the photoelastic streaks. The use of overflow can significantly reduce flow‐induced stresses. If the slot thickness is set to a proper value, the flow‐induced stress can be reduced by more than 80%. On the other hand, a slot that is too thick does not have significant reducing effects. Therefore, using overflow to reduce flow‐induced stresses during transparent part production is a promising approach if the material cost is worthy of the quality. Highlights: A double iteration method is proposed for viscoelastic flow problem. Overflow can reduce the stress as much as 80% if the dimension is properly set. The simulated stress streaks are in good agreement with photoelasticities.Keywords
Funding Information
- National Natural Science Foundation of China (11672271, 52273045)
This publication has 38 references indexed in Scilit:
- Relaxation of residual stresses in plastic cover lenses with applications in the injection molding processEngineering Failure Analysis, 2015
- The Application of the Sequential Valve Gate Control in Injection MoldingAdvanced Materials Research, 2011
- Effect of packing pressure on refractive index variation in injection molding of precision plastic optical lensAdvances in Polymer Technology, 2011
- Birefringent Analysis of Plastic Lens Injection Molding for Mobile Phone CameraTransactions of Materials Processing, 2011
- Frozen-in birefringence and anisotropic shrinkage in optical moldings: I. Theory and simulation schemePolymer, 2010
- Effect of process parameters on injection compression molding of pickup lensApplied Mathematical Modelling, 2005
- Simulation of injection‐compression molding process, Part 3: Effect of process conditions on part birefringenceAdvances in Polymer Technology, 2002
- Constitutive equations for viscoelastic liquids: Formulation, analysis and comparison with data1999
- On nonlinear effects in the extensional flow of polymeric liquidsRheologica Acta, 1983
- A finite-element/finite-difference simulation of the injection-molding filling processJournal of Non-Newtonian Fluid Mechanics, 1980