Measurement of high water-cut heavy oil flow based on differential pressure of swirling flow
Authors:
- Zhi-Hui WangZWZhi-Hui Wang
- Xing-Kai ZhangXZXing-Kai Zhang
- Rui-Quan LiaoRLRui-Quan Liao
- Zhi-Xiong MaZMZhi-Xiong Ma
- Dong WangDWDong Wang
- Wei-Xia YangWYWei-Xia Yang
Open Access
- 1 January 2024
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Abstract
Real-time measurement of heavy oil production is critical to ensure stable production. Due to the complex kinematic characteristics of heavy oil, existing methods cannot accurately measure its flow rate and water cut. In this paper, a novel method is proposed to measure the high water-cut heavy oil flow by using the differential pressure of the two-phase swirling flow in the pipe. For the swirling flow in the pipe, the radial differential pressure and the axial differential pressure exist simultaneously, which are very sensitive to the flow rate and water cut. The formation mechanism of the two kinds of differential pressure is analyzed theoretically, and their relationship with flow rate and water cut is studied by experiment and numerical simulation. The measurement model of heavy oil–water two-phase flow on the above relations is validated by field experiments. The radial differential pressure is only related to the two-phase flow rate, varying exponentially with the flow rate when the oil viscosity is greater than 10 000 mPa s. This characteristic is very useful for the heavy oil–water two-phase flow measurement. The axial differential pressure decreases with the increase in water cut in cases of water cut 85%. With the increase in water cut, the ratio of axial differential pressure to radial differential pressure first decreases and then increases. The relative errors of the established measurement model for flow rate and water cut are 0.19%–17.92% and 0.21%–15.5%, respectively, and more than 70% of the measurements with a relative error of less than 10%. The study of the heavy oil–water two-phase flow measurement method can optimize the measurement cost and accelerate the process of intelligent oilfield construction.Keywords
This publication has 38 references indexed in Scilit:
- The parameters measurement of air–water two phase flow using the electrical resistance tomography (ERT) technique in a bubble columnFlow Measurement and Instrumentation, 2013
- Theoretical study of vertical slug flow measurement by data fusion from electromagnetic flowmeter and electrical resistance tomographyFlow Measurement and Instrumentation, 2011
- CFD Simulation of Inlet Design Effect on Deoiling Hydrocyclone Separation EfficiencyChemical Engineering & Technology, 2009
- Experimental viscosities of heavy oil mixtures up to 450 K and high pressures using a mercury capillary viscometerJournal of Petroleum Science and Engineering, 2003
- Application of electrical resistance tomography to two-phase pipe flow parameters measurementFlow Measurement and Instrumentation, 2003
- Application of electrical capacitance tomography to the void fraction measurement of two-phase flowIEEE Transactions on Instrumentation and Measurement, 2003
- Multiphase Flow Metering: Current Trends and Future DevelopmentsJournal of Petroleum Technology, 2002
- Validation of electrical-impedance tomography for measurements of material distribution in two-phase flowsInternational Journal of Multiphase Flow, 2000
- Effects of water in oil and oil in water on single-phase flowmetersFlow Measurement and Instrumentation, 1999
- Capacitance transducers for non-intrusive measurement of water in crude oilFlow Measurement and Instrumentation, 1989