A Phenomenological Thermal Spray Wall Interaction Modeling Framework Applied to a High-Temperature Ignition Assistant Device
- 11 March 2024
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (9) , 1-35
Abstract
Airborne compression ignition engines must operate with reliable ignition systems to achieve proper ignition at every cycle, particularly at high altitudes. Glow-plug-based ignition-assistant (IA) devices can provide the necessary energy to preheat the fuel and ensure ignitability of the fuel-air mixture. Ignitability of liquid sprays can be facilitated via direct impingement onto the hot IA surface, however this comes with adverse effects on the IA durability. Therefore, optimizing an IA's design requires detailed understanding of the physics of fuel spray impingement of superheated surfaces. While spray impingement on relatively low wall temperatures has been extensively studied and appropriate numerical models have been proposed through the years, fundamental understanding of high-speed liquid spray impingement on superheated walls is still elusive. This work aims to formulate a phenomenological thermal spray-wall interaction framework for modeling the film-boiling-induced heat transfer, atomization, and dispersion of fuel spray droplets impinging onto a superheated IA device. A qualitative comparison of the new phenomenological model is performed against optical experiments from the literature of an F-24 fuel spray injected onto an IA device located 12 mm away from the injector tip. The temperature of the IA was set at 1400 K. The fuel injection pressure was 400 bar, while the ambient gas pressure and temperature were 30 bar and 800 K, respectively. The performance of the phenomenological model is evaluated in comparison with two other state-of-art models from the literature. A qualitative analysis of the different spray and fuel-air mixture characteristics is performed to outline the differences in the predictions offered by the new phenomenological model and the two state-of-art spray-wall interaction models.Keywords
This publication has 13 references indexed in Scilit:
- High-pressure fuel spray ignition behavior with hot surface interactionProceedings of the Combustion Institute, 2021
- Characterization of secondary droplets during thermal atomization regimeExperimental Thermal and Fluid Science, 2018
- Thermal atomisation of a liquid drop after impact onto a hot substrateJournal of Fluid Mechanics, 2018
- Drop collision with a hot, dry solid substrate: Heat transfer during nucleate boilingPhysical Review Fluids, 2017
- Heat transfer in the film boiling regime: Single drop impact and spray coolingInternational Journal of Heat and Mass Transfer, 2017
- Advances and challenges in explaining fuel spray impingement: How much of single droplet impact research is useful?Progress in Energy and Combustion Science, 2010
- A STUDY ON THE SPRAY–WALL INTERACTION MODEL CONSIDERING DEGREE OF SUPERHEAT IN THE WALL SURFACENumerical Heat Transfer, Part B: Fundamentals, 2001
- Film boiling heat transfer of droplet streams and spraysInternational Journal of Heat and Mass Transfer, 1997
- Design and Development of a Direct Injected, Glow Plug Ignition-Assisted, Natural Gas EngineJournal of Engineering for Gas Turbines and Power, 1995
- A particle-fluid numerical model for liquid spraysJournal of Computational Physics, 1980