Investigating the effects of processing head and substrate inclination on the EHLA process: Impact on track formation and surface roughness
Open Access
- 27 January 2026
- journal article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 38 (1)
Abstract
Extreme high-speed laser material deposition (EHLA) is a laser-based coating process known for its high deposition rates and excellent resource efficiency. To further increase productivity, higher laser powers and powder feed rates are increasingly used, but this also raises the thermal load on the processing head due to back-reflected radiation. Inclining the processing head or substrate helps deflect this radiation, while also enabling coatings in geometrically constrained areas, such as internal surfaces. However, inclination introduces asymmetries in the powder and laser distribution, potentially affecting track formation and melt pool behavior. This study investigates how inclination between the processing head and a rotationally symmetric substrate influences track geometry, surface quality, dilution, and thermal impact. Two inclination configurations were examined across a range of angles, with systematic variation of feed and rotation direction to simulate pushing and pulling deposition strategies. The results reveal that inclination has a significant and configuration-dependent effect on surface roughness, build-up volume, powder catchment efficiency, and thermal penetration. Variations in asymmetry orientation relative to the motion direction lead to measurable differences in coating properties. The findings offer new insights into optimizing EHLA process parameters for inclined setups, contributing to more robust and application-specific coating strategies.Keywords
This publication has 14 references indexed in Scilit:
- Effect of the substrate inclination angle on 316L stainless steel fabricated by hollow-laser direct energy depositionJournal of Manufacturing Processes, 2024
- Coating of Aluminum with High Deposition Rates through Extreme High-Speed Laser ApplicationJournal of Thermal Spray Technology, 2023
- Inclined shaping quality and optimization of laser claddingOptik, 2022
- Development of a novel green coating process with laserScientific Reports, 2022
- Discrete Phase Modeling of the Powder Flow Dynamics and the Catchment Efficiency in Laser Directed Energy Deposition With Inclined Coaxial NozzlesJournal of Manufacturing Science and Engineering, 2021
- An analytical model of bead morphology on the inclined substrate in coaxial laser claddingSurface and Coatings Technology, 2021
- The influence of substrate tilt angle on the morphology of laser cladding layerSurface and Coatings Technology, 2020
- Effects of tilt angle between laser nozzle and substrate on bead morphology in multi-axis laser claddingJournal of Manufacturing Processes, 2019
- Temperature field and residual stress distribution for laser metal depositionJournal of Laser Applications, 2018
- Analysis of track formation during laser metal depositionJournal of Laser Applications, 2017