Distributed feedback lasers heterogeneously integrated on a standard 220 nm silicon photonics platform via direct bonding
Authors:
- Yu QiaoYQYu Qiao
- Caiqiang GuCGCaiqiang Gu
- Bing WangBWBing Wang
- 28 October 2026
- journal article
- Published by Optica Publishing Group in Photonics Research
- Vol. 14 (11) , 4805
Abstract
Heterogeneous integration of III–V distributed feedback (DFB) lasers on silicon photonics platforms is the key technological step toward fully integrated on-chip photonic systems. However, its implementation on industry-standard 220 nm silicon photonics platforms is hindered by two major factors: weak optical interaction between the guided mode in the III–V gain region and the silicon-based DFB grating, and inefficient power transfer from the III–V active region to the silicon waveguide. Most prior demonstrations have been implemented on non-standard silicon-on-insulator (SOI) platforms featuring 400–500 nm thick silicon device layers, which enhances grating feedback and coupling efficiency. The use of a thick non-standard silicon layer compromises foundry compatibility, increases fabrication complexity, and complicates component design due to the emergence of higher-order vertical modes. Here we develop a heterogeneous integration technology that overcomes these obstacles, culminating in the integration of indium phosphide quantum well (InP QW) DFB lasers on a standard 220 nm silicon photonics platform. An ultrathin bonding interface is used to strengthen optical coupling between the III–V gain region and the silicon DFB grating so that a quarter-wave phase-shifted grating is fabricated with an optimized coupling coefficient that ensures stable single-mode operation. A multi-stage mode-size converter further enables efficient power transfer into the silicon waveguide within an ultra-compact footprint of ∼40 μm . The fabricated device exhibits a threshold current of 39 mA, a maximum on-chip output power of 8.3 mW per facet, a side-mode suppression ratio exceeding 49 dB, and a direct modulation bandwidth of ∼10 GHz at 20°C. Multi-wavelength operation from 1505 to 1575 nm is further achieved via grating engineering. This work demonstrates a scalable and foundry-compatible approach for high-density on-chip silicon photonic light sources supporting wavelength-division multiplexed optical interconnect applications.Keywords
Funding Information
- Guangdong ST Program (2025B0101180001)
- National Natural Science Foundation of China (62375293)
- National Natural Science Foundation of China (62235005)
This publication has 35 references indexed in Scilit:
- Industry insight: photonics to scale AI data centersnpj Nanophotonics, 2026
- Scaling photonic integrated circuits with InP technology: A perspectiveAPL Photonics, 2024
- Linewidth narrowing in self-injection-locked on-chip lasersLight: Science & Applications, 2023
- Perspective on the future of silicon photonics and electronicsApplied Physics Letters, 2021
- Hertz-linewidth semiconductor lasers using CMOS-ready ultra-high-Q microresonatorsNature Photonics, 2021
- Micro‐Transfer‐Printed III‐V‐on‐Silicon C‐Band Semiconductor Optical AmplifiersLaser & Photonics Reviews, 2020
- Tutorial on narrow linewidth tunable semiconductor lasers using Si/III-V heterogeneous integrationAPL Photonics, 2019
- Novel Light Source Integration Approaches for Silicon PhotonicsLaser & Photonics Reviews, 2017
- Silicon Photonics Design2015
- III‐V/silicon photonics for on‐chip and intra‐chip optical interconnectsLaser & Photonics Reviews, 2010