Quantitative Evaluation of the Dependence of Pool Boiling Heat Transfer Enhancement on Sintered Particle Coating Characteristics
- 8 November 2016
- journal article
- research article
- Published by Wiley in Journal of Heat Transfer
- Vol. 139 (2) , 021502
Abstract
Immersion cooling strategies often employ surface enhancements to improve the pool boiling heat transfer performance. Sintered particle/powder coatings have been commonly used on smooth surfaces to reduce the wall superheat and increase the critical heat flux (CHF). However, there is no unified understanding of the role of coating characteristics on pool boiling heat transfer enhancement. The morphology and size of the particles affect the pore geometry, permeability, thermal conductivity, and other characteristics of the sintered coating. In turn, these characteristics impact the heat transfer coefficient and CHF during boiling. In this study, pool boiling of FC-72 is experimentally investigated using copper surfaces coated with a layer of sintered copper particles of irregular and spherical morphologies for a range of porosities (∼40–80%). Particles of the same effective diameter (90–106 μm) are sintered to yield identical coating thicknesses (∼4 particle diameters). The porous structure formed by sintering is characterized using microcomputed tomography (μ-CT) scanning to study the geometric and effective thermophysical properties of the coatings. The boiling performance of the porous coatings is analyzed. Coating characteristics that influence the boiling heat transfer coefficient and CHF are identified and their relative strength of dependence analyzed using regression analysis. Irregular particles yield higher heat transfer coefficients compared to spherical particles at similar porosity. The coating porosity, pore diameter, unit necking area, unit interfacial area, effective thermal conductivity, and effective permeability are observed to be the most critical coating properties affecting the boiling heat transfer coefficient and CHF.Keywords
This publication has 31 references indexed in Scilit:
- Effect of particle size on surface-coating enhancement of pool boiling heat transferInternational Journal of Heat and Mass Transfer, 2015
- Separate effects of surface roughness, wettability, and porosity on the boiling critical heat fluxApplied Physics Letters, 2013
- Boiling heat transfer on a dendritic and micro-porous surface in R134a and FC-72Applied Thermal Engineering, 2011
- Ambient and High-Temperature Thermal Conductivity of Thermal Sprayed CoatingsJournal of Thermal Spray Technology, 2006
- Enhanced boiling of HFE-7100 dielectric liquid on porous graphiteEnergy Conversion and Management, 2005
- Enhanced saturation and subcooled boiling of FC-72 dielectric liquidInternational Journal of Heat and Mass Transfer, 2005
- Pool-boiling CHF enhancement by modulated porous-layer coating: theory and experimentInternational Journal of Heat and Mass Transfer, 2001
- A Painting Technique to Enhance Pool Boiling Heat Transfer in Saturated FC-72Journal of Heat Transfer, 1995
- A technique for enhancing boiling heat transfer with application to cooling of electronic equipmentIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1992
- WALL AND PARTICLE-SHAPE EFFECTS ON HEAT TRANSFER IN PACKED BEDSChemical Engineering Communications, 1988