Fabricating 2.5D SiC f /SiC Composite Using Polycarbosilane/SiC/Al Mixture for Matrix Derivation
Authors:
- 16 February 2007
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 90 (3) , 969-972
Abstract
2.5D SiC f /SiC composites were produced by a modified polymer infiltration and pyrolysis process. Fine Al and SiC powders were first infiltrated into large inter‐bundle pores. During pyrolytic decomposition of the polymer, the active Al filler reacts with small carbon‐bearing polymer fragments, and reactive nitrogen atmosphere to form new phases of carbide or nitride. The volume expansion compensates for polymer shrinkage to a certain degree. The microstructural evolution and mechanical performances were characterized. The result indicates that the addition of Al fillers has significant influence on the mechanical properties of the composites. For the composite with Al loading, a proportional‐limit stress of 380 MPa and a maximum stress of 441 MPa are achieved.Keywords
This publication has 13 references indexed in Scilit:
- Manufacturing SiC‐Fiber‐Reinforced SiC Matrix Composites by Improved CVI/Slurry Infiltration/Polymer Impregnation and PyrolysisJournal of the American Ceramic Society, 2004
- Effect of SiC particle dispersion on microstructure and mechanical properties of polymer-derived SiC/SiC compositeMaterials Science and Engineering: A, 2003
- Effect of 1600°C Heat Treatment on C/SiC Composites Fabricated by Polymer Infiltration and Pyrolysis with AllylhydridopolycarbosilaneJournal of the American Ceramic Society, 2002
- Microstructural evolution and mechanical performances of SiC/SiC composites by polymer impregnation/microwave pyrolysis (PIMP) processCeramics International, 2002
- Properties and radiation effects in high-temperature pyrolyzed PIP-SiC/SiCJournal of Nuclear Materials, 2001
- Development of SiC/SiC composites by PIP in combination with RSJournal of Nuclear Materials, 2001
- The concept of a strong interface applied to SiC/SiC composites with a BN interphaseActa Materialia, 2000
- High-performance SiC/SiC composites by improved PIP processing with new precursor polymersJournal of Nuclear Materials, 2000
- Fiber‐Reinforced Ceramic‐Matrix Composites with a Polysiloxane/Boron‐Derived MatrixJournal of the American Ceramic Society, 1997
- Active‐Filler‐Controlled Pyrolysis of Preceramic PolymersJournal of the American Ceramic Society, 1995