Understanding the Morphology of PTB7:PCBM Blends in Organic Photovoltaics
- 25 October 2013
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 4 (5)
Abstract
The structure–property relationships of PTB7‐phenyl‐C61‐butyric acid methyl ester (PCBM)‐based organic photovoltaics are investigated. The morphology is investigated in an active layer setting where a multi‐length‐scale morphology is observed using a solvent additive‐assisted film processing. This multi‐length‐scale structure consists of a phase separated morphology with a characteristic length scale of ≈30 nm, which is critical for producing large currents in devices; a second length scale of ≈130 nm, arises from face‐on PTB7 crystalline aggregates. This latter morphological feature is also observed in films prepared without the use of an additive. By observing the structure formation in situ during solvent evaporation for blade coated thin films, the additive is found to promote the formation of ordered domains of the PTB7 at an earlier stage during the solvent evaporation, which is critical in the development of the final morphology. In studies on PTB7/PCBM bilayers, PCBM is found to diffuse into the PTB7 layer. However, the performance of devices prepared in this manner is low. This diffusion leads to a swelling of the PTB7 and a reduction in the crystallinity of the PTB7, reflecting the strong miscibility of PCBM with PTB7. The morphology resulting from the interdiffusion is single‐length‐scale with slightly large phase separation. This leads to devices with poor performance.Keywords
Funding Information
- U.S. Department of Energy, Office of Basic Energy Sciences (DE-SC0001087)
This publication has 31 references indexed in Scilit:
- Enhanced power-conversion efficiency in polymer solar cells using an inverted device structureNature Photonics, 2012
- On the morphology of polymer‐based photovoltaicsJournal of Polymer Science Part B: Polymer Physics, 2012
- Molecular Order in High-Efficiency Polymer/Fullerene Bulk Heterojunction Solar CellsACS Nano, 2011
- Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar CellsAdvanced Materials, 2011
- Synthesis of Fluorinated Polythienothiophene-co-benzodithiophenes and Effect of Fluorination on the Photovoltaic PropertiesJournal of the American Chemical Society, 2011
- Polymer–Fullerene Bulk‐Heterojunction Solar CellsAdvanced Materials, 2010
- For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%Advanced Materials, 2010
- Polymer solar cells with enhanced open-circuit voltage and efficiencyNature Photonics, 2009
- Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic PropertiesJournal of the American Chemical Society, 2009
- Polymer–Fullerene Composite Solar CellsAngewandte Chemie International Edition, 2007