Process Chain for the Production of a Bimetal Component from Mg with a Complete Al Cladding
Open Access
Abstract
With respect to its density, magnesium (Mg) has a high potential for lightweight components. Nevertheless, the industrial application of Mg is limited due to, for example, its sensitivity to corrosion. To increase the applicability of Mg, a process chain for the production of a Mg component with a complete aluminum (Al) cladding is presented. Hydrostatic co-extrusion was used to produce bar-shaped rods with a diameter of 20 mm. The bonding between the materials was verified by ultrasonic testing. Specimens with a length of 79 mm were cut off from the rods and forged by using a two-staged process. After the first step (Heading), the Mg core was removed partially by drilling to ensure a complete enclosing of the remaining Mg during the second forging step (Net shape forging). The geometry of the drilling hole and the heading die design were dimensioned with the Finite Element-simulation software FORGE. Hence, a complete Al-enclosed Mg component was achieved by using the described process chain and forming processes. Microstructural investigations confirm the formation of an intermetallic interface as expected.Keywords
This publication has 25 references indexed in Scilit:
- The effect of architecture on the mechanical properties of Mg–3Al–1Zn Rods Containing Hard Al Alloy CoresScripta Materialia, 2015
- Extrusion of the bimetallic aluminum-magnesium rods and tubesForschung im Ingenieurwesen, 2015
- Coextrusion of Mg–Al macro compositesJournal of Materials Processing Technology, 2012
- Extrusion of hybrid sheet metalsJournal of Materials Processing Technology, 2012
- Simulation of the Co-Extrusion of Hybrid Mg/Al ProfilesKey Engineering Materials, 2009
- Deformation Analysis of Co-Extrusion Process of Aluminum Alloy and Copper AlloyKey Engineering Materials, 2007
- Herstellung verbundverstärkter Aluminiumprofile für ultraleichte Tragwerke durch StrangpressenMaterialwissenschaft und Werkstofftechnik, 2004
- An Analytical Approach to the Problem of Core Fracture During Extrusion of Bimetal RodsJournal of Engineering for Industry, 1985
- The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal RodsJournal of Engineering for Industry, 1976
- Hydrostatic extrusion of composite rods with hard coresInternational Journal of Mechanical Sciences, 1973