Responses of Semi‐Rigid Base Asphalt Pavement with Interlayer Contact Bonding Model
Authors:
Open Access
- 1 January 2020
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Abstract
In this paper, an interlayer contact bonding model according to the Coulomb friction model was developed by contact element and target element to accurately simulate the bonding condition between the adjacent layers of semi‐rigid base asphalt pavement. The interlayer contact bonding model can be used to not only simulate the partial bond condition between adjacent layers but also imitate the phenomenon of bonding failure between adjacent layers. Semi‐rigid base asphalt pavement structure, finite element mesh, material property with temperature, kinds of interlayer bonding failure, and moving load were explained in detail, and the responses of the semi‐rigid base asphalt pavement structure were calculated and analyzed by this model at the room temperature and the higher temperature. The results indicated that the disengaging area between the asphalt concrete layer and the base layer can negatively affect the strain responses of asphalt pavement, especially at the higher temperature, and it can also weaken the asphalt pavement performance with the increase of the disengaging area. The deformation of semi‐rigid base asphalt pavement is intensified under the action of the high temperature and the overloads, which would be easy to result in potential pavement structural deficiency. At the higher temperature, the adverse effect of moving loads on asphalt pavement is greater than that of roadbed, and the responses of the asphalt pavement decrease with the increase of the vehicle speed.Keywords
Funding Information
- National Natural Science Foundation of China (11801441, 20190507)
This publication has 12 references indexed in Scilit:
- Effects of layer interface conditions on top-down fatigue cracking of asphalt pavementsInternational Journal of Pavement Engineering, 2018
- Effect of the Dynamic Load on Stresses in a Deck Pavement with an Interlayer Contact ModelAdvances in Civil Engineering, 2018
- Effects of interlayer bonding conditions between semi-rigid base layer and asphalt layer on mechanical responses of asphalt pavement structureInternational Journal of Pavement Research and Technology, 2017
- Influence of the interface conditions on flexible pavement structures lifeRomanian Journal of Transport Infrastructure, 2016
- State of the art: interface shear resistance of asphalt surface layersInternational Journal of Pavement Engineering, 2016
- Evaluation of interlayer bonding condition on structural response characteristics of asphalt pavement using finite element analysis and full-scale field testsConstruction and Building Materials, 2015
- Numerically Supported Experimental Determination of the Behavior of the Interlayer Bond in Asphalt PavementTransportation Research Record: Journal of the Transportation Research Board, 2015
- Analysis of Mechanical Responses of Asphalt Pavement Interlayers Based on Shear Spring ComplianceJournal of Highway and Transportation Research and Development (English Edition), 2014
- Characterisation of interface bonding between hot-mix asphalt overlay and concrete pavements: modelling andin-situresponse to accelerated loadingInternational Journal of Pavement Engineering, 2012
- Numerical and Experimental Analysis for the Interlayer Behavior of Double-Layered Asphalt Pavement SpecimensJournal of Materials in Civil Engineering, 2011