Xuntao Wang
Xuntao Wang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Hu Wang
School of Science, Chang'an University, Xi'an Shaanxi, China
4 shared publications- Jianhu Feng
School of Sciences
3 shared publications - Changhao Zhang
School of Science
2 shared publications - Jianhu Feng
School of Science, Chang’an University, Xi’an, China
2 shared publications Shidi Hong
School of Science, Chang'an University, Xi'an Shaanxi, China
2 shared publicationsSupei Zheng
School of Science, Chang'an University, Xi'an Shaanxi, China
2 shared publications
Latest Publications
- Open Access
- 8 December 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-15
Response analysis of orthotropic steel deck pavement based on interlayer contact bonding condition
In this research the interlayer contact condition was considered between the adjacent layers of orthotropic steel deck pavement, and an interface contact bonding model was applied to simulate the interlayer bonding condition and evaluate the response of deck pavement under vehicle loads. An advantage of this model is that it can simulate not only the full-bond condition but also the debonding condition at somewhere between adjacent layers. The responses of the orthotropic steel deck pavement were calculated and analyzed by the model, and it found that this model is reasonable and credible to evaluate the responses of the deck pavement comparing with the previous researches. The full-bond condition was an ideal condition between adjacent layers, which was prone to underestimate the responses and deformation of the deck pavement. Moreover, the position and size of the disengaging area have a notable influence on the tensile strain at the top of SMA layer and the bottom of GA layer, and the tensile strain of them also increase with the increase of the disengaging area. Finally, the responses of the steel deck pavement changed obviously when the vehicle speed increase, so the suitable speed limit may reduce the responses and deformation for prolonging the service life of the orthotropic steel deck pavement.
- 8 December 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-15
Open AccessResponse analysis of orthotropic steel deck pavement based on interlayer contact bonding condition
In this research the interlayer contact condition was considered between the adjacent layers of orthotropic steel deck pavement, and an interface contact bonding model was applied to simulate the interlayer bonding condition and evaluate the response of deck pavement under vehicle loads. An advantage of this model is that it can simulate not only the full-bond condition but also the debonding condition at somewhere between adjacent layers. The responses of the orthotropic steel deck pavement were calculated and analyzed by the model, and it found that this model is reasonable and credible to evaluate the responses of the deck pavement comparing with the previous researches. The full-bond condition was an ideal condition between adjacent layers, which was prone to underestimate the responses and deformation of the deck pavement. Moreover, the position and size of the disengaging area have a notable influence on the tensile strain at the top of SMA layer and the bottom of GA layer, and the tensile strain of them also increase with the increase of the disengaging area. Finally, the responses of the steel deck pavement changed obviously when the vehicle speed increase, so the suitable speed limit may reduce the responses and deformation for prolonging the service life of the orthotropic steel deck pavement.
- Open Access
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Responses of Semi‐Rigid Base Asphalt Pavement with Interlayer Contact Bonding Model
In this paper, an interlayer contact bonding model according to the Coulomb friction model was developed by contact element and target element to accurately simulate the bonding condition between the adjacent layers of semi‐rigid base asphalt pavement. The interlayer contact bonding model can be used to not only simulate the partial bond condition between adjacent layers but also imitate the phenomenon of bonding failure between adjacent layers. Semi‐rigid base asphalt pavement structure, finite element mesh, material property with temperature, kinds of interlayer bonding failure, and moving load were explained in detail, and the responses of the semi‐rigid base asphalt pavement structure were calculated and analyzed by this model at the room temperature and the higher temperature. The results indicated that the disengaging area between the asphalt concrete layer and the base layer can negatively affect the strain responses of asphalt pavement, especially at the higher temperature, and it can also weaken the asphalt pavement performance with the increase of the disengaging area. The deformation of semi‐rigid base asphalt pavement is intensified under the action of the high temperature and the overloads, which would be easy to result in potential pavement structural deficiency. At the higher temperature, the adverse effect of moving loads on asphalt pavement is greater than that of roadbed, and the responses of the asphalt pavement decrease with the increase of the vehicle speed.
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Open AccessResponses of Semi‐Rigid Base Asphalt Pavement with Interlayer Contact Bonding Model
In this paper, an interlayer contact bonding model according to the Coulomb friction model was developed by contact element and target element to accurately simulate the bonding condition between the adjacent layers of semi‐rigid base asphalt pavement. The interlayer contact bonding model can be used to not only simulate the partial bond condition between adjacent layers but also imitate the phenomenon of bonding failure between adjacent layers. Semi‐rigid base asphalt pavement structure, finite element mesh, material property with temperature, kinds of interlayer bonding failure, and moving load were explained in detail, and the responses of the semi‐rigid base asphalt pavement structure were calculated and analyzed by this model at the room temperature and the higher temperature. The results indicated that the disengaging area between the asphalt concrete layer and the base layer can negatively affect the strain responses of asphalt pavement, especially at the higher temperature, and it can also weaken the asphalt pavement performance with the increase of the disengaging area. The deformation of semi‐rigid base asphalt pavement is intensified under the action of the high temperature and the overloads, which would be easy to result in potential pavement structural deficiency. At the higher temperature, the adverse effect of moving loads on asphalt pavement is greater than that of roadbed, and the responses of the asphalt pavement decrease with the increase of the vehicle speed.
- Open Access
- 29 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 322 (4) , 042026
Stress Regression Analysis of Asphalt Concrete Deck Pavement Based on Orthogonal Experimental Design and Interlayer Contact
A three-dimensional finite element box girder bridge and its asphalt concrete deck pavement were established by ANSYS software, and the interlayer bonding condition of asphalt concrete deck pavement was assumed to be contact bonding condition. Orthogonal experimental design is used to arrange the testing plans of material parameters, and an evaluation of the effect of different material parameters in the mechanical response of asphalt concrete surface layer was conducted by multiple linear regression model and using the results from the finite element analysis. Results indicated that stress regression equations can well predict the stress of the asphalt concrete surface layer, and elastic modulus of waterproof layer has a significant influence on stress values of asphalt concrete surface layer.
- 29 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 322 (4) , 042026
Open AccessStress Regression Analysis of Asphalt Concrete Deck Pavement Based on Orthogonal Experimental Design and Interlayer Contact
A three-dimensional finite element box girder bridge and its asphalt concrete deck pavement were established by ANSYS software, and the interlayer bonding condition of asphalt concrete deck pavement was assumed to be contact bonding condition. Orthogonal experimental design is used to arrange the testing plans of material parameters, and an evaluation of the effect of different material parameters in the mechanical response of asphalt concrete surface layer was conducted by multiple linear regression model and using the results from the finite element analysis. Results indicated that stress regression equations can well predict the stress of the asphalt concrete surface layer, and elastic modulus of waterproof layer has a significant influence on stress values of asphalt concrete surface layer.
- Open Access
- 1 January 2018
- Published by Wiley in Advances in Civil Engineering
- Vol. 2018 (1)
A Form Finding Method for Arch Bridges Using Parametric Level Set Method
Topology optimization has developed rapidly in the past three decades; as a creative and efficient optimization technique, it has been applied in engineering fields of aerospace and mechanical. However, there are a few attempts in bridge form design. In this paper, the parametric level set method is utilized to solve the form finding of arch bridges. The optimization model for minimizing the structural compliance under the volume constraint is built. Three numerical examples of form finding of arch bridges are studied. Results show that the optimal structures which have well‐distributed stress and smooth force transmission are almost identical with the actual forms of arch bridges. The optimal forms can be treated as alternatives in the preliminary design stage, and topology optimization has a bright prospect in form finding of arch bridges.
- 1 January 2018
- Published by Wiley in Advances in Civil Engineering
- Vol. 2018 (1)
Open AccessA Form Finding Method for Arch Bridges Using Parametric Level Set Method
Topology optimization has developed rapidly in the past three decades; as a creative and efficient optimization technique, it has been applied in engineering fields of aerospace and mechanical. However, there are a few attempts in bridge form design. In this paper, the parametric level set method is utilized to solve the form finding of arch bridges. The optimization model for minimizing the structural compliance under the volume constraint is built. Three numerical examples of form finding of arch bridges are studied. Results show that the optimal structures which have well‐distributed stress and smooth force transmission are almost identical with the actual forms of arch bridges. The optimal forms can be treated as alternatives in the preliminary design stage, and topology optimization has a bright prospect in form finding of arch bridges.
- Open Access
- 1 January 2018
- Published by Wiley in Advances in Civil Engineering
- Vol. 2018 (1)
Effect of the Dynamic Load on Stresses in a Deck Pavement with an Interlayer Contact Model
Random surface roughness of bridge deck pavement just like random road surface roughness was simulated by the harmony superposition method in this paper. The dynamic load of vehicle was calculated by the random surface roughness of the deck pavement and the quarter‐car model. A finite element model of a box girder bridge and its deck pavement was established, and the bonding condition between the adjacent layers was assumed to be contact bonding condition. The stress values of the asphalt concrete layer were calculated and analyzed when surface roughness condition, vehicle speed, and disengaging area changed. Results show that random surface roughness of deck pavement affected the stress trend of the asphalt concrete layer obviously. The appearance of disengaging area would increase the stress values of the asphalt concrete layer and the normal tensile stress value between the asphalt concrete layer and the waterproof layer. This would speed up the damage of the asphalt concrete layer and enlarge further the disengaging area.
- 1 January 2018
- Published by Wiley in Advances in Civil Engineering
- Vol. 2018 (1)
Open AccessEffect of the Dynamic Load on Stresses in a Deck Pavement with an Interlayer Contact Model
Random surface roughness of bridge deck pavement just like random road surface roughness was simulated by the harmony superposition method in this paper. The dynamic load of vehicle was calculated by the random surface roughness of the deck pavement and the quarter‐car model. A finite element model of a box girder bridge and its deck pavement was established, and the bonding condition between the adjacent layers was assumed to be contact bonding condition. The stress values of the asphalt concrete layer were calculated and analyzed when surface roughness condition, vehicle speed, and disengaging area changed. Results show that random surface roughness of deck pavement affected the stress trend of the asphalt concrete layer obviously. The appearance of disengaging area would increase the stress values of the asphalt concrete layer and the normal tensile stress value between the asphalt concrete layer and the waterproof layer. This would speed up the damage of the asphalt concrete layer and enlarge further the disengaging area.
- Open Access
- 1 January 2017
- Published by Atlantis Press SARL
Stress Analysis of Asphalt Concrete Deck Pavement on Steel Bridge based on Burgers Model and interlayer contact
- 1 January 2017
- Published by Atlantis Press SARL
Open AccessStress Analysis of Asphalt Concrete Deck Pavement on Steel Bridge based on Burgers Model and interlayer contact
- 31 May 2016
- Published by Global Vision Press in International Journal of Smart Home
- Vol. 10 (5) , 253-262
Research on the Seismic Design of High-rise Steel Building Based on Security Perspective
- 31 May 2016
- Published by Global Vision Press in International Journal of Smart Home
- Vol. 10 (5) , 253-262
Research on the Seismic Design of High-rise Steel Building Based on Security Perspective
- Open Access
- 1 January 2016
- Published by Atlantis Press SARL
Stresses Analysis for Asphalt Concrete Pavement of Curved Box Girder Bridge under Interlaminar Contact Condition
- 1 January 2016
- Published by Atlantis Press SARL
Open AccessStresses Analysis for Asphalt Concrete Pavement of Curved Box Girder Bridge under Interlaminar Contact Condition