Calculation of overloads induced by indexing errors in spur gearboxes using multi-degree-of-freedom dynamical simulation
Authors:
- 1 December 2006
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 220 (4) , 273-282
Abstract
Indexing errors are a cause of significant vibration and overloading in gearboxes and require much designer attention, especially in high-speed applications. Furthermore, the continuously varying elastic deflections of the meshing teeth contribute to vibration excitation and tooth profile corrections, which are usually employed to alleviate the ill effects of these errors and further complicate the modelling of the phenomenon. Current gear dynamical simulation models either do not consider indexing errors or do so in a simplified manner. To address this problem, in this article, the exact geometry of tooth meshing is used as a starting point for a comprehensive dynamical modelling of gear systems, seamlessly incorporating the effect of pitch errors, tooth separation, degree-of-freedom coupling, and profile corrections. The resulting model is fundamentally non-linear. A single-stage spur gear reducer is then simulated dynamically using various scenarios of error distributions and profile corrections, and the overload factor is calculated. The results show that there are optimal corrections, which can reduce overload by a factor of nearly 35 per cent; however, with bigger corrections, the benefit diminishes. The sensitivity of different design solutions to manufacturing tolerances is investigated and definitive trends are recognized. Finally, a new design recommendation for profile correction is made on the basis of these findings.Keywords
This publication has 16 references indexed in Scilit:
- THEORETICAL ASPECTS OF TORQUE RESPONSES IN SPUR GEARING DUE TO MESH STIFFNESS VARIATIONMechanical Systems and Signal Processing, 2003
- An analytical method to determine the influence of shape deviation on load distribution and mesh stiffness for spur gearsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2002
- VIBRATION ANALYSIS OF HYPOID TRANSMISSIONS APPLYING AN EXACT GEOMETRY-BASED GEAR MESH THEORYJournal of Sound and Vibration, 2001
- NON-LINEAR DYNAMIC RESPONSE OF A SPUR GEAR PAIR: MODELLING AND EXPERIMENTAL COMPARISONSJournal of Sound and Vibration, 2000
- The kinematic and dynamic analysis of crowned spur gear driveComputer Methods in Applied Mechanics and Engineering, 1998
- A General Approach for Determining Dynamic Forces in Spur GearsJournal of Mechanical Design, 1998
- METHOD FOR PRECISION CALIBRATION OF ROTARY SCALE ERRORS AND PRECISION DETERMINATION OF GEAR TOOTH INDEX ERRORSMechanical Systems and Signal Processing, 1998
- DYNAMIC ANALYSIS OF SPUR GEAR PAIRS: STEADY-STATE RESPONSE AND STABILITY OF THE SDOF MODEL WITH TIME-VARYING MESHING DAMPINGMechanical Systems and Signal Processing, 1997
- Effect of Contact Ratio on Spur Gear Dynamic Load With No Tooth Profile ModificationsJournal of Mechanical Design, 1996
- Coupled torsional-lateral-axial vibration analysis of a geared shaft system using substructure synthesisMechanism and Machine Theory, 1996