Repair Parameter Design of Outer Reinforcement Layers of Offshore Wind Turbine Blade Spar Cap Based on Structural and Aerodynamic Analysis
Open Access
Abstract
The influence of the outer reinforcement layers on the repair structure and aerodynamic performance was studied. Firstly, a continuous damage mechanics model was established, and the 3D Hashin criterion and cohesive zone material model were used to analyze the damage repair model. The failure load deviation was 5.5%. Secondly, on the basis of the transition model and SST–ω turbulence model, the aerodynamic analysis model of DU300 airfoil was established. The numerical simulation results showed that the lift coefficient and pressure distribution at the angle of attack of 10° and 15° were deviated from the experimental values by 2%. Furthermore, 27 structural repair models, nine 2D aerodynamic repair models, and a 3D full-scale blade model were designed. It was found that, when the repair length accounted for 60% of the total model length, the failure load increased by 22%, but the aerodynamic power with the repair length of 10 m was decreased by 0.137%. When the repair area was large and the repair height was from 4 mm to 6 mm, the failure load was greatly increased by about 30%, and the aerodynamic pressure distribution and static pressure field fluctuated significantly. The results show that the structural and aerodynamic characteristics were closely related to the repair parameters.
Keywords
Funding Information
- National Natural Science Foundation of China (52175105, LJKMZ20220486)
- the Basic Scientific Research Project of Liaoning Province (52175105, LJKMZ20220486)
This publication has 37 references indexed in Scilit:
- An Optimal Number-Dependent Preventive Maintenance Strategy for Offshore Wind Turbine Blades Considering LogisticsAdvances in Operations Research, 2013
- Toward local identification of cohesive zone models using digital image correlationEuropean Journal of Mechanics - A/Solids, 2012
- Formulation and assessment of an enhanced finite element procedure for the analysis of delamination growth phenomena in composite structuresComposites Science and Technology, 2011
- Computational modelling of impact damage in brittle materialsInternational Journal of Solids and Structures, 1996
- Delaminations in composite structures: Its origin, buckling, growth and stabilityComposites Part B: Engineering, 1996
- On the identification of a vortexJournal of Fluid Mechanics, 1995
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- Scarf Repair Joints in Carbon Fibre Reinforced Plastic StripsThe Journal of Adhesion, 1981
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960
- The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracksJournal of Applied Mathematics and Mechanics, 1959