Influence of cement stiffness and bone morphology on the compressive properties of bone–cement composites in simulated vertebroplasty
- 19 November 2012
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 101B (2) , 364-374
Abstract
Vertebroplasty is widely used to treat vertebral compression fractures. Little is known about the influence of morphological parameters of the bone on the properties of the bone–cement composite. Furthermore, although generic finite element (FE) models have been suggested as a way to compute the values of these properties, their accuracy has not been established. In the experimental part of this study, we tested bovine cancellous bone and three different polymethylmethacrylate bone cements and determined six quasi‐static uniaxial compressive properties of bone–cement composite specimens and 10 morphological parameters of the bone. For the FE work, we used two simulations, one being μFE and the other unit cell FE. In conclusion, we found that (1) for composite specimens, that relative contribution of the cement to the overall response of the composite increases with increasing cement stiffness; (2) the anisotropy ratio is the bone morphological property that exerts the most significant influence on the experimentally obtained compressive properties of the bone–cement composites determined; (3) the accuracy of the computed compressive properties of the composites ranged from low to high, depending on simulation method used. The largest errors, however, can partially be explained by difference in boundary conditions between the experimental testing and the simulation techniques. The lattermost finding points to the potential for simplified FE models being incorporated into automatic material mapping schemes in whole bone vertebra FE simulations. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2013.Keywords
This publication has 29 references indexed in Scilit:
- Micromechanics of postmortem‐retrieved cement–bone interfacesJournal of Orthopaedic Research, 2009
- Finite element simulation of cement‐bone interface micromechanics: A comparison to experimental resultsJournal of Orthopaedic Research, 2009
- NMP‐modified PMMA bone cement with adapted mechanical and hardening properties for the use in cancellous bone augmentationJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2009
- Performance of vertebral cancellous bone augmented with compliant PMMA under dynamic loadsActa Biomaterialia, 2008
- Properties of an injectable low modulus PMMA bone cement for osteoporotic boneJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- Mechanics of bone/PMMA composite structures: An in vitro study of human vertebraeJournal of Biomechanics, 2007
- A CT-Based High-Order Finite Element Analysis of the Human Proximal Femur Compared to In-vitro ExperimentsJournal of Biomechanical Engineering, 2006
- Vertebroplasty and Kyphoplasty Affect Vertebral Motion Segment Stiffness and Stress DistributionsSpine, 2005
- Trabecular bone modulus–density relationships depend on anatomic siteJournal of Biomechanics, 2003
- Elastic constants of composites formed from PMMA bone cement and anisotropic bovine tibial cancellous boneJournal of Biomechanics, 1989