Development of a Molding Mixture for the Production of Large-Sized Casting Molds
Open Access
- 13 August 2025
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (8) , 436
Abstract
This study presents the results of research on the use of Portland cement as a binder for producing semi-permanent molds intended for large-scale castings made from complex alloyed steels. Based on the conducted experiments, the optimal composition of a molding mixture based on Portland cement was determined to manufacture large molds with high operational performance. The technological properties of the mixtures were investigated, focusing on the flowability, sedimentation stability, and strength after curing. The recommended mixture composition is as follows: Portland cement—18.75%; sand—56.5%; quartz powder—25%; water—25%. To accelerate the hardening process, the use of curing accelerators is advised. The most effective additives are a 9% aluminum nitrate solution at 0.6–1.5% by weight or sodium aluminate at 3–4%. This composition ensures the required strength within a short curing time. A specific thermal treatment regime is also recommended to further stabilize the mold structure: heating to 450 °C at a rate of 75 °C per hour, holding for 2 h, followed by controlled cooling together with the furnace.Keywords
Funding Information
- Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan (BR24993020)
This publication has 27 references indexed in Scilit:
- Preparation of supplementary cementitious material by semi-dry carbonated ternesite and its effect on hydration and mechanical properties of Portland cementCement and Concrete Research, 2025
- The effects and mechanisms of low-energy consumption microwave curing on the microstructure and strength development of cement-based materialsConstruction and Building Materials, 2025
- Study on the anchoring properties of new water glass-modified alkali-activated portland cement materialsConstruction and Building Materials, 2024
- The role of ettringite seeds in enhancing the ultra-early age strength of Portland cement containing aluminum sulfate acceleratorComposites Part B: Engineering, 2024
- The positive effects of power ultrasound on Portland cement pastes and mortars; a study of chemical shrinkage and mechanical performanceCement and Concrete Composites, 2023
- Fractal analysis of microstructures in Portland cement pastes – Effect of curing conditionsConstruction and Building Materials, 2022
- Rheological characterization of ultra-high performance concrete for 3D printingCement and Concrete Composites, 2022
- Cement mortars with ceramic molds shells and paraffin waxes wastes: Physical and mechanical behaviorConstruction and Building Materials, 2022
- Functionally graded lightweight cement-based composites with outstanding mechanical performances via additive manufacturingAdditive Manufacturing, 2022
- Alternative cement clinkersCement and Concrete Research, 2018