Drying Characteristics and Milling Quality of Rough Rice Dried in a Single Pass Incorporating Glass Transition Principles
- 20 November 2012
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (16) , 1821-1830
Abstract
The objective was to study the drying characteristics and milling quality of rough rice subjected to single-pass drying while controlling kernel material states. Drying experiments were conducted at 60, 70, and 80°C and relative humidities ranging from 13 to 83%. For all drying air temperatures and tempering conditions, milling quality was not significantly different from the controls when the relative humidity of the drying air was maintained above 63% (kernel core and surface maintained in a rubbery state) and rice was tempered immediately after drying, in sealed plastic bags and at the drying air temperature, for at least 60 min.Keywords
This publication has 25 references indexed in Scilit:
- Low-temperature, low-relative humidity drying of rough riceJournal of Food Engineering, 2010
- Relating Rough Rice Moisture Content Reduction and Tempering Duration to Head Rice Yield ReductionTransactions of the ASABE, 2007
- AIR AND RICE PROPERTY PROFILES WITHIN A COMMERCIAL CROSS-FLOW RICE DRYERApplied Engineering in Agriculture, 2004
- PH—Postharvest TechnologyBiosystems Engineering, 2002
- AN APPLICATION OF GLASS TRANSITION TEMPERATURE TO EXPLAIN RICE KERNEL FISSURE OCCURRENCE DURING THE DRYING PROCESS*Drying Technology, 2001
- Thin-layer solar drying characteristics of rough rice under natural convectionJournal of Food Engineering, 2001
- DRYING OF HIGH MOISTURE CONTENT PADDY IN A PILOT SCALE TRIANGULAR SPOUTED BED DRYERDrying Technology, 2001
- Glassy State Transition and Rice Drying: Development of a Brown Rice State DiagramCereal Chemistry, 2000
- A STUDY OF HEAD RICE YIELD REDUCTION OF LONG- AND MEDIUM-GRAIN RICE VARIETIES IN RELATION TO VARIOUS HARVEST AND DRYING CONDITIONSTransactions of the ASAE, 2000
- THE GLASS TRANSITION TEMPERATURE CONCEPT IN RICE DRYING AND TEMPERING: EFFECT ON MILLING QUALITYTransactions of the ASAE, 2000