Characterization of a polarization-independent transmission trap detector
Authors:
- 1 May 1997
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 36 (13) , 2807-2812
Abstract
A six-element polarization-independent transmission trap detector with coaxial input and output beams has been constructed and full characterized. The measured optical parameters are compared with their values, predicted by Fresnel equations. Measured transmittances are in agreement with the predicted values within 2 × 10-5 in the wavelength region from 450 to 650nm. The spectral responsivity of the transmission trap detector is in agreement with the predicted values within 0.035% at 543.5- and 633.0-nm vacuum wavelengths. The spatial uniformity of the responsivity is ±0.03% across the active area of approximately 5 × 6 mm2, measured with a laser beam of 1-mm diameter. The angular uniformity of the transmission trap detector is better than ±0.01% for ±3° rotation around two perpendicular axes.Keywords
This publication has 8 references indexed in Scilit:
- Optical power and transmittance measurements and their use in detector-based realization of the luminous intensity scaleOptical Engineering, 1995
- Transmission trap detectorsApplied Optics, 1994
- A Method of Realizing Spectral Irradiance Based on an Absolute Cryogenic RadiometerMetrologia, 1993
- Trap Detectors and their PropertiesMetrologia, 1991
- Spectral irradiance scales based on filtered absolute silicon photodetectorsApplied Optics, 1987
- Silicon photodiode device with 100% external quantum efficiencyApplied Optics, 1983
- Silicon photodiode absolute spectral response self-calibrationApplied Optics, 1980
- Interspecimen Comparison of the Refractive Index of Fused Silica*,†Journal of the Optical Society of America, 1965